What is the Makeblock XTool D1? Xtool X100 User Manual
XTool D1 is a laser cutter that has been produced by Makeblock. Xtool X100 User Manual
The company was developed in 2012 by Jasen Wang, who researched aircraft design at Northwestern Polytechnic College. The business is devoted to producing innovative products to aid people reveal themselves through production. Given that its creation, Makeblock has launched a number of educational robotics, as well as a coding platform for kids. It additionally introduced the MakeX Robot Competitors.
The XTool D1 is a mobile laser engraver that is capable of cutting and inscribing a selection of products. Its laser can eliminate intricate forms much faster than a scroll saw or jigsaw, as well as can be used for several tasks. Along with engraving, the D1 can likewise be utilized for various other projects, including producing fashion jewelry as well as light tones.
The D1 is a DIY package that can be set up in just about half a hr. Its unit is collapsible, enabling simple mobility as well as efficient air flow. It is additionally made of flame-retardant polyester, making it risk-free from dust fragments. The room also secures the working surface under the device.
The XTool D1 is geared up with a laser module that is capable of engrave on metals and numerous other products. It has actually an ultra-fine pressed laser spot of 0.08 x 0.08 mm. This enables finer inscription and higher accuracy.
The D1 likewise has a high resolution of 1000 DPI, that makes it feasible to etch on a wide range of products. The D1 likewise has an integrated smart device application that can be downloaded and install from the Android Store or the Apple Application Store. The app can be made use of to import laser designs from cost-free vector sites, including Etsy. The D1 can likewise be linked to a computer using USB or WiFi. It can also transfer data using Wi-Fi or a huge capacity TF card.
The D1 is capable of etching on Poplar plywood, which is just one of the most commonly utilized timbers for laser cutters. The D1 can likewise cut on various other woods, consisting of tough maple, walnut, and also rosewood. Its laser head is flexible, allowing for a 50mm array. It can also refine materials approximately 10mm thick, which means that it has the ability to engrave on a wide variety of materials. The D1 is developed for both residence as well as organization use.
The XTool D1 can be found in two designs: the 20W version and the 5W model. The 20W version has a larger laser head, and also a smaller working location. The 5W model has a workspace of 430 x 400 mm. It has a higher maximum speed of 400 mm/s, which makes it a much faster device. Xtool X100 User Manual
The D1 includes a steel frame, which provides optimum stability and also sturdiness. It additionally has a simultaneous belt to improve motion precision. The belt’s moderate tension is needed for accuracy, particularly when relocating at high speeds. The concurrent belt can also assist the machine keep secure and also reduce resonance. It can also eliminate the motion gap, enabling great vector graphics at broadband.
Order Your XTool Laser Products Here – Best Prices Guaranteed
XTool D1 Specification
| Parameter | Value |
|---|---|
|
Engraving Size
|
432 * 406 mm (17 * 16 inch)
|
|
Engraving Materials
|
Wood, Bamboo, Cardboard, Plastic, Leather, PCB Board, Aluminum Oxide, Non-reflective, Electroplating Layer and Paint Surface Layer Metal, 304 Mirror Stainless Steel, Glass, Ceramics, Cotton Cloth, Slate;
|
|
Laser Output Optical Power
|
10W
|
|
Laser Wavelength
|
450nm
|
|
Focusing Method
|
Fixed focus laser
|
|
Operating Software
|
Makeblock LaserBox Basic, LightBurn, Android and iOS
|
|
Input voltage
|
AC100-240V, 50/60Hz
|
|
Weight
|
5kg
|
|
Warranty
|
One Year
|
XTool D1 Laser Diode
XTool D1 Laser Diode is one of the most powerful diode laser on the marketplace. It generates clear lines down to 0.06 mm. This makes it a superb choice for almost all etching jobs. Its design is safe and also reputable. It is optimal for local business and also enthusiasts.
It can engrave different kinds of metal as well as wood. It has the ability to reduce 8 to tenmm plywood in one pass. It also has the ability to reduce leather and acrylic.
It features a number of accessories. You can get the package pack that includes the Air Help Establish as well as Honeycomb Working Panel. It sets you back $119 and also $269, respectively. You can additionally obtain a 1064nm laser head. This head lowers burn marks in plastic as well as is particularly useful for fragile precious jewelry styles. It likewise has a motion sensor and also flame discovery sensing unit.
It likewise features an emergency quit button. It can be regulated with Wi-fi and can import laser layouts from complimentary vector sites like Etsy. You can likewise regulate it by means of the Makeblock XTool D1 app on Android and also iphone.
It has an excellent focus system. The laser crosshairs relocate as needed as well as relocate to the frame of the artwork. This makes the etching very specific. It can likewise be used to create a thickening impact, which can be beneficial when engraving big items.
The XTool D1 Pro has improved attributes and laser power. It makes use of a 20W laser module to create a beam that cuts items in one pass. It can puncture 8mm black acrylic and also 10mm basswood. It additionally has a higher speed. It can get to inscribing precision of 0.0004 inches.
XTool D1 Focusing Procedure
The focusing technique on this maker is really brilliant. Beside the laser module, there is a pivoting arm which you pull out when you intend to concentrate the laser. It ensures that you drop the head on the correct range from the product. After that you tighten the thumb screw and pivot the arm back up. Xtool X100 User Manual
XTool D1 Special Features
Below are a few of the leading Special Attributes of the XTool D1:
Wireless Connectivity
Machine can be linked using USB or a Wi-fi. And you can also control with a smartphone application on Android or iphone.
Cutting and also Engraving Different Materials
Engrave: Wood, Bamboo, Cardboard, Plastic, Leather, PCB Board, Light Weight Aluminum Oxide, Non-reflective, Electroplating Layer as well as Paint Surface Area Layer Steel, 304 Mirror Stainless-steel, Glass, Ceramics, Cotton Towel, Slate.
The Makeblock XTool D1 is also a really qualified laser cutter.
Cut: Cardboard, Non-woven Material, Timber Board, Polymer, Some Thin Plastic Board, Sponge; cardboard …
You can reduce greater than 10mm thick things with this laser engraver. The equipment can cut wood, specifically Poplar plywood which is soft and also it is the preferred timber for all laser cutters.
I would certainly avoid some plastics like PVC and vinyl considering that it releases hydrogen chloride gas while being cut. This gas is hazardous and very corrosive (your machine will certainly corrosion rapidly).
We have actually checked the equipment with engraving as well as reducing various materials. You will certainly locate the outcomes of our tests few phases lower.
The Makeblock XTool D1 has steel rollers on all axis rather than the plastic ones we have seen on all various other equipments. This need to allow for even more precision and much less mechanical wobble when engraving at broadband. Xtool X100 User Manual
Advanced Stepper Motor Drivers
The maker has a very sophisticated controller board. It has Trinamic stepper motor drivers which drive the electric motors with a pure sine wave. In this manner the motors are extremely specific and also silent. The chauffeurs additionally sustain homing procedure without utilizing limitation switches over as the chauffeurs gauge existing through motors and spot the limit this way. This is why this device does not require physical restriction switches over for homing.
The equipment has chauffeurs for 3 axis– so you can plug in the roller system as a Z axis as opposed to having to disconnect among the axis when collaborating with a roller system.
XTool D1 Software
XTool D1 can be controlled using Wi-Fi or USB. The laser engraver tool instantly quits if an accidental touch occurs. This is wonderful for individuals that are concerned about security. The tool is likewise suitable with Windows as well as Mac OS systems.
The XTool D1 software program is extremely easy to use. Once you have actually the art work prepared, you can use the app to set up the laser. You can likewise tailor the laser settings and also develop personalized artwork. The app additionally consists of a materials listing.
XTool D1 Pro is an upgrade to the previous XTool D1 laser cutter. It is a high-accuracy laser cutting maker that can inscribe over 100 materials. The laser engraver device is easy to use as well as includes a safety cover. The machine has a warranty of twelve month.
XTool D1 Engraving
The XTool D1 is a very functional engraving maker. It cam be made use of to engrave on all types of materials/.
Right here is a list of products and also features that the XTool D1 flaunts:
- Vector Image Engraving
- Aluminium Engraving
- Acrylic Engraving And Cutting
- Plywood Cutting
- Hardwood Cutting
- Stainless Steel Engraving
- Photo Engraving
FAQ
Is the XTool D1 worth it?
Makeblock XTool D1 is an extremely well considered machine. Accurate, quick and well constructed. It comes at a costs price, yet it is worth it for someone that wants an excellent as well as almost a commercial quality table leading laser engraver efficient in quick cutting as well as accurate inscription thanks to a powerful 10W laser component.
Is XTool better than Glowforge?
The very first laser inscription and also cutting machine on our list is XTool D1 pro, the best option to Glowforge. It remains in first place due to the fact that it has gotten the Red Dot Layout 2022 Honor. The impressive design and advanced technology set this machine besides other makers on the marketplace.
Can the XTool D1 cut wood?
XTool D1-5W can reduce a 4mm basswood board simultaneously, and also XTool D1-10W can cut a 6mm basswood board
How thick wood can XTool D1 cut?
XTool D1-5W can cut 6mm timber board at once, and also XTool D1-10W can reduce 10mm wood board at one time.
Can XTool D1 cut leather?
XTool can cut as well as inscribe a massive variety of products, from something as slim as cells paper to something as thick as natural leather and also wood panels.
XTool D1 is a diode laser engraving and reducing maker that works with a variety of products, including different kinds of timber. Its powerful and very focused laser can conveniently reduce and also inscribed timber with supreme precision and accuracy.
Can the XTool D1 engrave alliminum?
You can additionally get the infrared laser module, which is especially made for metal and plastic engraving. It can inscribe numerous metals, consisting of light weight aluminum and also precious metals. It can likewise do colored inscribing on numerous steels, consisting of light weight aluminum.