What is the Makeblock XTool D1? Xtool X100 Pro2 X100pro2 Obd2
XTool D1 is a laser cutter that has actually been developed by Makeblock. Xtool X100 Pro2 X100pro2 Obd2
The business was developed in 2012 by Jasen Wang, that studied aircraft design at Northwestern Polytechnic University. The business is committed to developing innovative products to assist people share themselves with creation. Given that its creation, Makeblock has actually launched numerous educational robotics, in addition to a coding system for youngsters. It likewise launched the MakeX Robot Competitors.
The XTool D1 is a mobile laser engraver that can reducing and etching a range of products. Its laser can remove elaborate forms much faster than a scroll saw or jigsaw, and can be utilized for several jobs. In addition to engraving, the D1 can also be utilized for various other jobs, consisting of creating fashion jewelry as well as lamp tones.
The D1 is a DIY kit that can be assembled in only about half a hr. Its unit is foldable, allowing for simple transportability as well as efficient air flow. It is also constructed from flame-retardant polyester, making it safe from dirt bits. The enclosure additionally secures the functioning surface under the machine.
The XTool D1 is equipped with a laser module that can engrave on steels as well as numerous other products. It has actually an ultra-fine pressed laser place of 0.08 x 0.08 mm. This allows for finer inscription and also greater accuracy.
The D1 also has a high resolution of 1000 DPI, which makes it possible to engrave on a large range of products. The D1 additionally has a built-in smart device app that can be downloaded from the Android Shop or the Apple App Store. The application can be used to import laser layouts from totally free vector websites, consisting of Etsy. The D1 can also be attached to a computer through USB or WiFi. It can also transfer information using Wi-Fi or a huge capability TF card.
The D1 can etching on Poplar plywood, which is just one of one of the most typically utilized timbers for laser cutters. The D1 can additionally reduce on various other woods, including tough maple, walnut, as well as rosewood. Its laser head is flexible, permitting a 50mm range. It can also refine products as much as 10mm thick, which suggests that it is able to engrave on a wide variety of materials. The D1 is designed for both residence and also service usage.
The XTool D1 comes in two versions: the 20W version as well as the 5W model. The 20W version has a larger laser head, and a smaller working location. The 5W design has a workplace of 430 x 400 mm. It has a greater maximum speed of 400 mm/s, that makes it a quicker equipment. Xtool X100 Pro2 X100pro2 Obd2
The D1 includes a steel structure, which supplies maximum stability as well as durability. It also has a synchronous belt to improve motion precision. The belt’s modest stress is needed for accuracy, particularly when relocating at high speeds. The concurrent belt can additionally assist the device stay secure and also lessen vibration. It can additionally get rid of the movement void, permitting great vector graphics at high speeds.
Order Your XTool Laser Products Here – Best Prices Guaranteed
XTool D1 Specification
| Parameter | Value |
|---|---|
|
Engraving Size
|
432 * 406 mm (17 * 16 inch)
|
|
Engraving Materials
|
Wood, Bamboo, Cardboard, Plastic, Leather, PCB Board, Aluminum Oxide, Non-reflective, Electroplating Layer and Paint Surface Layer Metal, 304 Mirror Stainless Steel, Glass, Ceramics, Cotton Cloth, Slate;
|
|
Laser Output Optical Power
|
10W
|
|
Laser Wavelength
|
450nm
|
|
Focusing Method
|
Fixed focus laser
|
|
Operating Software
|
Makeblock LaserBox Basic, LightBurn, Android and iOS
|
|
Input voltage
|
AC100-240V, 50/60Hz
|
|
Weight
|
5kg
|
|
Warranty
|
One Year
|
XTool D1 Laser Diode
XTool D1 Laser Diode is one of the most effective diode laser on the market. It creates clear lines down to 0.06 mm. This makes it an exceptional choice for nearly all engraving jobs. Its layout is risk-free as well as dependable. It is suitable for small companies as well as enthusiasts.
It can engrave various types of metal and timber. It has the capacity to reduce eight to tenmm plywood in one pass. It likewise has the ability to cut natural leather and polymer.
It includes a variety of accessories. You can acquire the package pack that consists of the Air Assist Establish and Honeycomb Working Panel. It sets you back $119 as well as $269, specifically. You can likewise get a 1064nm laser head. This head lowers melt marks in plastic and is particularly useful for delicate precious jewelry designs. It likewise has a motion sensing unit and also flame discovery sensor.
It likewise includes an emergency situation quit switch. It can be regulated via Wi-fi as well as can import laser layouts from complimentary vector websites like Etsy. You can also control it using the Makeblock XTool D1 app on Android as well as iphone.
It has a great emphasis mechanism. The laser crosshairs relocate as needed as well as relocate to the structure of the art work. This makes the inscribing really exact. It can also be made use of to create a thickening effect, which can be beneficial when inscribing huge products.
The XTool D1 Pro has improved functions as well as laser power. It uses a 20W laser component to develop a beam that reduces objects in one pass. It can puncture 8mm black acrylic as well as 10mm basswood. It likewise has a higher rate. It can reach engraving accuracy of 0.0004 inches.
XTool D1 Focusing Procedure
The focusing approach on this device is very smart. Alongside the laser component, there is a swivelling arm which you take out when you want to focus the laser. It guarantees that you go down the head on the proper range from the product. Then you tighten up the thumb screw as well as swivel the arm back up. Xtool X100 Pro2 X100pro2 Obd2
XTool D1 Special Features
Below are several of the top Special Features of the XTool D1:
Wireless Connection
Machine can be linked by means of USB or a WiFi. And you can additionally manage with a smartphone app on Android or iphone.
Cutting and also Engraving Different Products
Engrave: Timber, Bamboo, Cardboard, Plastic, Natural Leather, PCB Board, Light Weight Aluminum Oxide, Non-reflective, Electroplating Layer and Paint Surface Layer Steel, 304 Mirror Stainless-steel, Glass, Ceramics, Cotton Towel, Slate.
The Makeblock XTool D1 is additionally a really qualified laser cutter.
Cut: Cardboard, Non-woven Material, Timber Board, Polymer, Some Thin Plastic Board, Sponge; cardboard …
You can reduce more than 10mm thick stuff with this laser engraver. The maker can reduce timber, especially Poplar plywood which is soft as well as it is the preferred wood for all laser cutters.
I would certainly prevent some plastics like PVC and also plastic since it launches hydrogen chloride gas while being cut. This gas is toxic and also extremely destructive (your equipment will certainly corrosion promptly).
We have actually examined the maker with inscription and also cutting different materials. You will locate the outcomes of our examinations few phases lower.
The Makeblock XTool D1 has steel rollers on all axis as opposed to the plastic ones we have actually seen on all various other equipments. This must enable even more accuracy and much less mechanical wobble when inscribing at high speeds. Xtool X100 Pro2 X100pro2 Obd2
Advanced Stepper Electric Motor Drivers
The maker has a very sophisticated controller board. It has Trinamic stepper motor drivers which drive the motors with a pure sine wave. This way the electric motors are really exact and quiet. The vehicle drivers likewise sustain homing procedure without using restriction switches as the drivers gauge existing via electric motors as well as find the limit this way. This is why this machine does not need physical limit changes for homing.
The maker has chauffeurs for 3 axis– so you can connect in the roller system as a Z axis as opposed to needing to detach one of the axis when working with a roller system.
XTool D1 Software
XTool D1 can be managed through Wi-Fi or USB. The laser engraver device instantly quits if an accidental touch takes place. This is fantastic for people who are concerned about safety. The tool is additionally suitable with Windows and Mac OS systems.
The XTool D1 software program is really easy to use. As soon as you have the art work prepared, you can utilize the app to set up the laser. You can also personalize the laser setups and produce custom art work. The app also includes a products listing.
XTool D1 Pro is an upgrade to the previous XTool D1 laser cutter. It is a high-accuracy laser reducing equipment that can engrave over 100 products. The laser engraver device is easy to use and also includes a safety cover. The device has a service warranty of 12 months.
XTool D1 Engraving
The XTool D1 is an extremely functional engraving equipment. It cam be used to etch on all sorts of products/.
Here is a listing of materials and functions that the XTool D1 flaunts:
- Vector Image Engraving
- Aluminium Engraving
- Acrylic Engraving And Cutting
- Plywood Cutting
- Hardwood Cutting
- Stainless Steel Engraving
- Photo Engraving
FAQ
Is the XTool D1 worth it?
Makeblock XTool D1 is an extremely well considered equipment. Precise, quick and also solidly developed. It comes with a costs price, however it is worth it for somebody that desires a great and also virtually an industrial quality table top laser engraver capable of rapid cutting and also exact inscription thanks to an effective 10W laser component.
Is XTool better than Glowforge?
The very first laser inscription and reducing maker on our checklist is XTool D1 pro, the very best choice to Glowforge. It remains in starting point because it has actually gotten the Red Dot Layout 2022 Award. The impressive layout as well as modern modern technology established this machine apart from other makers on the market.
Can the XTool D1 cut wood?
XTool D1-5W can reduce a 4mm basswood board at once, as well as XTool D1-10W can reduce a 6mm basswood board
How thick wood can XTool D1 cut?
XTool D1-5W can cut 6mm timber board at once, as well as XTool D1-10W can reduce 10mm wood board at once.
Can XTool D1 cut leather?
XTool can cut as well as inscribe a massive variety of products, from something as slim as tissue paper to something as thick as natural leather and also wood panels.
XTool D1 is a diode laser inscription and also reducing maker that is compatible with a wide variety of materials, including different kinds of wood. Its powerful and also highly focused laser can easily cut and also inscribed wood with ultimate accuracy and also precision.
Can the XTool D1 engrave alliminum?
You can also get the infrared laser module, which is particularly created metal and also plastic inscription. It can inscribe various metals, including light weight aluminum and precious metals. It can likewise do tinted etching on various steels, consisting of aluminum.