What is the Makeblock XTool D1? Xtool X100 Pro2 User Manual
XTool D1 is a laser cutter that has been produced by Makeblock. Xtool X100 Pro2 User Manual
The company was developed in 2012 by Jasen Wang, that examined aircraft style at Northwestern Polytechnic College. The company is committed to developing innovative products to aid people share themselves through development. Given that its development, Makeblock has actually launched numerous academic robots, as well as a coding system for youngsters. It likewise launched the MakeX Robot Competition.
The XTool D1 is a portable laser engraver that is capable of cutting and inscribing a range of products. Its laser can eliminate detailed forms much faster than a scroll saw or jigsaw, and also can be made use of for various tasks. In addition to inscription, the D1 can likewise be utilized for other projects, consisting of producing jewelry as well as lamp shades.
The D1 is a DIY kit that can be set up in just regarding half a hr. Its unit is foldable, permitting easy portability and efficient ventilation. It is additionally made from flame-retardant polyester, making it risk-free from dust bits. The room additionally safeguards the functioning surface under the device.
The XTool D1 is geared up with a laser module that can engrave on steels and also lots of various other products. It has an ultra-fine compressed laser spot of 0.08 x 0.08 mm. This allows for finer engraving and also greater precision.
The D1 likewise has a high resolution of 1000 DPI, that makes it possible to inscribe on a wide range of materials. The D1 also has a built-in mobile phone application that can be downloaded and install from the Android Shop or the Apple Application Shop. The application can be made use of to import laser layouts from cost-free vector sites, consisting of Etsy. The D1 can also be attached to a computer through USB or WiFi. It can additionally move information via Wi-Fi or a large capacity TF card.
The D1 is capable of inscribing on Poplar plywood, which is among the most commonly utilized woods for laser cutters. The D1 can likewise cut on various other woods, including hard maple, walnut, and rosewood. Its laser head is adjustable, allowing for a 50mm variety. It can likewise process products as much as 10mm thick, which indicates that it is able to engrave on a variety of products. The D1 is designed for both residence and organization use.
The XTool D1 comes in two designs: the 20W version and the 5W model. The 20W version has a larger laser head, and a smaller working location. The 5W design has a workspace of 430 x 400 mm. It has a higher maximum speed of 400 mm/s, that makes it a quicker maker. Xtool X100 Pro2 User Manual
The D1 features a steel framework, which offers optimum stability and durability. It additionally has a concurrent belt to enhance movement precision. The belt’s moderate tension is required for precision, specifically when relocating at high speeds. The simultaneous belt can additionally assist the machine remain secure and also lessen resonance. It can likewise eliminate the motion gap, permitting great vector graphics at high speeds.
Order Your XTool Laser Products Here – Best Prices Guaranteed
XTool D1 Specification
| Parameter | Value |
|---|---|
|
Engraving Size
|
432 * 406 mm (17 * 16 inch)
|
|
Engraving Materials
|
Wood, Bamboo, Cardboard, Plastic, Leather, PCB Board, Aluminum Oxide, Non-reflective, Electroplating Layer and Paint Surface Layer Metal, 304 Mirror Stainless Steel, Glass, Ceramics, Cotton Cloth, Slate;
|
|
Laser Output Optical Power
|
10W
|
|
Laser Wavelength
|
450nm
|
|
Focusing Method
|
Fixed focus laser
|
|
Operating Software
|
Makeblock LaserBox Basic, LightBurn, Android and iOS
|
|
Input voltage
|
AC100-240V, 50/60Hz
|
|
Weight
|
5kg
|
|
Warranty
|
One Year
|
XTool D1 Laser Diode
XTool D1 Laser Diode is one of the most powerful diode laser on the marketplace. It creates clear lines down to 0.06 mm. This makes it an exceptional choice for almost all etching tasks. Its layout is safe as well as reliable. It is excellent for small companies as well as hobbyists.
It can inscribe different sorts of metal as well as timber. It has the capacity to reduce 8 to tenmm plywood in one pass. It likewise has the ability to cut natural leather and polymer.
It includes a number of devices. You can acquire the bundle pack that consists of the Air Assist Set as well as Honeycomb Working Panel. It sets you back $119 as well as $269, specifically. You can likewise get a 1064nm laser head. This head minimizes shed marks in plastic and is especially useful for delicate precious jewelry designs. It also has a movement sensor and also fire discovery sensing unit.
It additionally features an emergency situation stop switch. It can be regulated through WiFi and also can import laser layouts from totally free vector websites like Etsy. You can also control it via the Makeblock XTool D1 application on Android and also iOS.
It has an excellent emphasis system. The laser crosshairs relocate as required and move to the frame of the artwork. This makes the engraving very precise. It can also be used to create a thickening effect, which can be beneficial when etching large products.
The XTool D1 Pro has actually improved features and also laser power. It uses a 20W laser component to produce a light beam that cuts things in one pass. It can cut through 8mm black acrylic and 10mm basswood. It additionally has a greater speed. It can get to engraving precision of 0.0004 inches.
XTool D1 Focusing Procedure
The focusing method on this device is very creative. Beside the laser module, there is a pivoting arm which you take out when you want to focus the laser. It ensures that you go down the directly the right range from the material. After that you tighten the thumb screw and also pivot the arm back up. Xtool X100 Pro2 User Manual
XTool D1 Special Features
Right here are several of the top Unique Attributes of the XTool D1:
Wireless Connectivity
Equipment can be linked via USB or a WiFi. And you can likewise manage with a smartphone application on Android or iphone.
Cutting and also Engraving Different Materials
Engrave: Timber, Bamboo, Cardboard, Plastic, Natural Leather, PCB Board, Aluminum Oxide, Non-reflective, Electroplating Layer and Paint Surface Layer Steel, 304 Mirror Stainless Steel, Glass, Ceramics, Cotton Towel, Slate.
The Makeblock XTool D1 is likewise an extremely capable laser cutter.
Cut: Cardboard, Non-woven Material, Wood Board, Acrylic, Some Thin Plastic Board, Sponge; cardboard …
You can cut more than 10mm thick things with this laser engraver. The maker can reduce wood, specifically Poplar plywood which is soft and also it is the preferred timber for all laser cutters.
I would certainly avoid some plastics like PVC as well as plastic considering that it launches hydrogen chloride gas while being cut. This gas is hazardous and also extremely corrosive (your maker will certainly rust quickly).
We have actually checked the maker with inscription and also reducing various products. You will certainly discover the outcomes of our tests few chapters lower.
The Makeblock XTool D1 has steel rollers on all axis rather than the plastic ones we have actually seen on all other devices. This need to permit more precision as well as much less mechanical wobble when engraving at broadband. Xtool X100 Pro2 User Manual
Advanced Stepper Motor Drivers
The equipment has an extremely innovative controller board. It has Trinamic stepper electric motor vehicle drivers which drive the electric motors with a pure sine wave. This way the motors are really exact as well as silent. The motorists also sustain homing procedure without making use of limit switches as the drivers determine present through motors as well as discover the limit by doing this. This is why this device does not need physical restriction switches over for homing.
The equipment has motorists for 3 axis– so you can connect in the roller system as a Z axis as opposed to needing to disconnect among the axis when working with a roller system.
XTool D1 Software
XTool D1 can be regulated through Wi-Fi or USB. The laser engraver tool automatically stops if an accidental touch happens. This is terrific for individuals that are concerned concerning safety. The tool is additionally compatible with Windows and Mac OS systems.
The XTool D1 software program is very easy to use. Once you have actually the artwork prepared, you can utilize the app to set up the laser. You can also customize the laser settings and also produce custom artwork. The app also consists of a products checklist.
XTool D1 Pro is an upgrade to the previous XTool D1 laser cutter. It is a high-accuracy laser reducing machine that can etch over 100 products. The laser engraver device is easy to use and comes with a protective cover. The maker has a guarantee of twelve month.
XTool D1 Engraving
The XTool D1 is a very flexible engraving machine. It cam be made use of to inscribe on all kinds of materials/.
Below is a checklist of materials and functions that the XTool D1 flaunts:
- Vector Image Engraving
- Aluminium Engraving
- Acrylic Engraving And Cutting
- Plywood Cutting
- Hardwood Cutting
- Stainless Steel Engraving
- Photo Engraving
FAQ
Is the XTool D1 worth it?
Makeblock XTool D1 is a very well considered device. Precise, quick as well as sturdily constructed. It comes with a premium rate, however it is worth it for a person that desires a good as well as practically an industrial grade table top laser engraver efficient in rapid cutting as well as accurate engraving thanks to a powerful 10W laser component.
Is XTool better than Glowforge?
The very first laser engraving and also reducing maker on our checklist is XTool D1 pro, the very best choice to Glowforge. It is in top place due to the fact that it has obtained the Red Dot Design 2022 Award. The exceptional design and also state-of-the-art modern technology set this maker apart from other machines on the market.
Can the XTool D1 cut wood?
XTool D1-5W can reduce a 4mm basswood board at once, and XTool D1-10W can reduce a 6mm basswood board
How thick wood can XTool D1 cut?
XTool D1-5W can cut 6mm wood board at once, as well as XTool D1-10W can reduce 10mm timber board at once.
Can XTool D1 cut leather?
XTool can cut and engrave a substantial range of products, from something as slim as cells paper to something as thick as leather and wood panels.
XTool D1 is a diode laser engraving as well as reducing machine that works with a vast array of materials, consisting of various types of wood. Its powerful and very focused laser can easily cut and also engraved wood with supreme accuracy and precision.
Can the XTool D1 engrave alliminum?
You can also get the infrared laser component, which is specifically produced metal and also plastic engraving. It can engrave numerous steels, consisting of aluminum and precious metals. It can additionally do colored etching on different steels, including light weight aluminum.