What is the Makeblock XTool D1? Xtool X100 Pro2 Manual
XTool D1 is a laser cutter that has actually been developed by Makeblock. Xtool X100 Pro2 Manual
The business was established in 2012 by Jasen Wang, that researched aircraft design at Northwestern Polytechnic College. The company is committed to producing innovative items to help individuals share themselves with development. Because its creation, Makeblock has actually launched numerous instructional robotics, in addition to a coding system for children. It also introduced the MakeX Robot Competitors.
The XTool D1 is a mobile laser engraver that can reducing as well as etching a range of materials. Its laser can eliminate elaborate shapes much faster than a scroll saw or jigsaw, and can be used for many different projects. In addition to inscription, the D1 can additionally be made use of for other tasks, consisting of developing fashion jewelry and lamp tones.
The D1 is a DIY package that can be set up in only about half an hour. Its enclosure is foldable, allowing for simple transportability and also effective air flow. It is also made of flame-retardant polyester, making it secure from dust bits. The enclosure also protects the working surface under the maker.
The XTool D1 is outfitted with a laser module that is capable of engrave on metals and also several other materials. It has actually an ultra-fine compressed laser area of 0.08 x 0.08 mm. This allows for finer engraving and also higher accuracy.
The D1 likewise has a high resolution of 1000 DPI, which makes it possible to inscribe on a wide range of materials. The D1 additionally has a built-in mobile phone application that can be downloaded from the Android Store or the Apple App Store. The app can be used to import laser styles from cost-free vector sites, including Etsy. The D1 can likewise be linked to a computer system via USB or WiFi. It can additionally move data by means of Wi-Fi or a big capacity TF card.
The D1 is capable of inscribing on Poplar plywood, which is among one of the most typically used woods for laser cutters. The D1 can additionally reduce on various other woods, including hard maple, walnut, as well as rosewood. Its laser head is flexible, allowing for a 50mm range. It can additionally refine materials as much as 10mm thick, which implies that it has the ability to engrave on a wide variety of products. The D1 is developed for both house and business usage.
The XTool D1 comes in two models: the 20W variation and also the 5W version. The 20W version has a bigger laser head, and also a smaller working location. The 5W model has a working area of 430 x 400 mm. It has a greater maximum speed of 400 mm/s, that makes it a faster equipment. Xtool X100 Pro2 Manual
The D1 includes a steel framework, which provides maximum security as well as durability. It also has a simultaneous belt to boost movement accuracy. The belt’s moderate stress is required for accuracy, specifically when relocating at high speeds. The concurrent belt can likewise assist the machine stay stable and reduce resonance. It can likewise eliminate the movement space, permitting great vector graphics at broadband.
Order Your XTool Laser Products Here – Best Prices Guaranteed
XTool D1 Specification
| Parameter | Value |
|---|---|
|
Engraving Size
|
432 * 406 mm (17 * 16 inch)
|
|
Engraving Materials
|
Wood, Bamboo, Cardboard, Plastic, Leather, PCB Board, Aluminum Oxide, Non-reflective, Electroplating Layer and Paint Surface Layer Metal, 304 Mirror Stainless Steel, Glass, Ceramics, Cotton Cloth, Slate;
|
|
Laser Output Optical Power
|
10W
|
|
Laser Wavelength
|
450nm
|
|
Focusing Method
|
Fixed focus laser
|
|
Operating Software
|
Makeblock LaserBox Basic, LightBurn, Android and iOS
|
|
Input voltage
|
AC100-240V, 50/60Hz
|
|
Weight
|
5kg
|
|
Warranty
|
One Year
|
XTool D1 Laser Diode
XTool D1 Laser Diode is the most powerful diode laser on the market. It generates clear lines down to 0.06 mm. This makes it a superb choice for mostly all etching tasks. Its design is safe and also reputable. It is perfect for small companies and hobbyists.
It can engrave various sorts of metal and timber. It has the capability to cut eight to tenmm plywood in one pass. It additionally has the capacity to cut leather as well as acrylic.
It comes with a variety of accessories. You can get the package pack that consists of the Air Help Establish as well as Honeycomb Working Panel. It costs $119 and $269, specifically. You can also obtain a 1064nm laser head. This head lowers shed marks in plastic and also is especially helpful for fragile fashion jewelry layouts. It likewise has an activity sensing unit and flame detection sensor.
It likewise features an emergency quit switch. It can be regulated through WiFi and can import laser styles from free vector sites like Etsy. You can additionally control it through the Makeblock XTool D1 app on Android and iphone.
It has an excellent emphasis mechanism. The laser crosshairs relocate as required and also move to the frame of the art work. This makes the inscribing very specific. It can also be used to create a thickening effect, which can be helpful when etching large things.
The XTool D1 Pro has actually improved attributes as well as laser power. It makes use of a 20W laser module to create a beam that cuts objects in one pass. It can cut through 8mm black acrylic and 10mm basswood. It likewise has a greater speed. It can get to inscribing accuracy of 0.0004 inches.
XTool D1 Focusing Procedure
The focusing technique on this device is really brilliant. Beside the laser module, there is a swivelling arm which you take out when you want to concentrate the laser. It assures that you go down the head on the appropriate range from the product. After that you tighten up the thumb screw as well as pivot the arm back up. Xtool X100 Pro2 Manual
XTool D1 Special Features
Below are several of the leading Unique Features of the XTool D1:
Wireless Connection
Maker can be linked through USB or a Wi-fi. And also you can likewise manage with a mobile phone app on Android or iphone.
Cutting and also Inscription Different Materials
Engrave: Wood, Bamboo, Cardboard, Plastic, Natural Leather, PCB Board, Light Weight Aluminum Oxide, Non-reflective, Electroplating Layer as well as Paint Surface Layer Metal, 304 Mirror Stainless-steel, Glass, Ceramics, Cotton Cloth, Slate.
The Makeblock XTool D1 is also a really capable laser cutter.
Cut: Cardboard, Non-woven Fabric, Timber Board, Polymer, Some Thin Plastic Board, Sponge; cardboard …
You can cut greater than 10mm thick stuff with this laser engraver. The maker can reduce timber, especially Poplar plywood which is soft and also it is the recommended timber for all laser cutters.
I would prevent some plastics like PVC and also plastic since it releases hydrogen chloride gas while being reduced. This gas is toxic and very corrosive (your equipment will certainly rust quickly).
We have actually examined the equipment with inscription and also cutting different products. You will certainly discover the outcomes of our tests couple of phases lower.
The Makeblock XTool D1 has steel rollers on all axis rather than the plastic ones we have actually seen on all various other devices. This need to enable more precision and also much less mechanical wobble when inscribing at broadband. Xtool X100 Pro2 Manual
Advanced Stepper Electric Motor Drivers
The equipment has an extremely innovative controller board. It has Trinamic stepper motor vehicle drivers which drive the motors with a pure sine wave. By doing this the electric motors are really accurate and also quiet. The drivers likewise support homing treatment without using limitation switches over as the drivers gauge present through motors as well as discover the limit in this manner. This is why this device does not need physical restriction switches for homing.
The equipment has chauffeurs for 3 axis– so you can plug in the roller system as a Z axis instead of needing to separate one of the axis when dealing with a roller system.
XTool D1 Software
XTool D1 can be regulated using Wi-Fi or USB. The laser engraver device automatically stops if an unexpected touch takes place. This is terrific for people who are worried about safety. The tool is likewise suitable with Windows as well as Mac OS systems.
The XTool D1 software is very easy to use. As soon as you have the art work prepared, you can utilize the app to establish the laser. You can additionally tailor the laser setups as well as develop personalized artwork. The application also consists of a materials list.
XTool D1 Pro is an upgrade to the previous XTool D1 laser cutter. It is a high-accuracy laser reducing equipment that can etch over 100 products. The laser engraver device is easy to use as well as comes with a protective cover. The equipment has a service warranty of one year.
XTool D1 Engraving
The XTool D1 is a very functional etching machine. It cam be utilized to engrave on all kinds of products/.
Here is a listing of materials and functions that the XTool D1 boasts:
- Vector Image Engraving
- Aluminium Engraving
- Acrylic Engraving And Cutting
- Plywood Cutting
- Hardwood Cutting
- Stainless Steel Engraving
- Photo Engraving
FAQ
Is the XTool D1 worth it?
Makeblock XTool D1 is a very well considered machine. Exact, fast as well as well constructed. It comes with a premium rate, yet it is worth it for a person that wants a good and also virtually a commercial quality table top laser engraver efficient in quick cutting and precise engraving thanks to a powerful 10W laser component.
Is XTool better than Glowforge?
The very first laser inscription and cutting equipment on our checklist is XTool D1 pro, the very best choice to Glowforge. It remains in starting point because it has actually obtained the Red Dot Style 2022 Award. The superior layout and also modern innovation established this machine besides other devices on the market.
Can the XTool D1 cut wood?
XTool D1-5W can reduce a 4mm basswood board simultaneously, as well as XTool D1-10W can reduce a 6mm basswood board
How thick wood can XTool D1 cut?
XTool D1-5W can reduce 6mm timber board at one time, as well as XTool D1-10W can cut 10mm wood board at one time.
Can XTool D1 cut leather?
XTool can reduce and engrave a huge selection of materials, from something as slim as cells paper to something as thick as natural leather as well as timber panels.
XTool D1 is a diode laser engraving and cutting machine that works with a wide range of products, including various kinds of wood. Its effective and also very focused laser can conveniently reduce as well as engraved wood with best accuracy as well as accuracy.
Can the XTool D1 engrave alliminum?
You can also get the infrared laser module, which is specifically produced metal and also plastic engraving. It can etch various metals, consisting of aluminum and also precious metals. It can likewise do colored inscribing on different steels, consisting of aluminum.