What is the Makeblock XTool D1? Xtool X100 Pro Honda 2014
XTool D1 is a laser cutter that has been produced by Makeblock. Xtool X100 Pro Honda 2014
The business was established in 2012 by Jasen Wang, who examined aircraft design at Northwestern Polytechnic College. The firm is committed to creating cutting-edge products to aid individuals share themselves via creation. Considering that its creation, Makeblock has actually launched a number of educational robotics, in addition to a coding platform for kids. It also released the MakeX Robot Competitors.
The XTool D1 is a mobile laser engraver that can cutting and also etching a selection of materials. Its laser can cut out complex shapes much faster than a scroll saw or jigsaw, and can be made use of for various tasks. Along with engraving, the D1 can additionally be made use of for various other tasks, including producing fashion jewelry and lamp tones.
The D1 is a DIY kit that can be set up in only about half a hr. Its unit is foldable, enabling simple portability and efficient air flow. It is also made from flame-retardant polyester, making it risk-free from dirt particles. The room additionally protects the working surface under the machine.
The XTool D1 is outfitted with a laser module that is capable of engrave on metals and also numerous other materials. It has actually an ultra-fine compressed laser area of 0.08 x 0.08 mm. This allows for finer inscription as well as greater accuracy.
The D1 likewise has a high resolution of 1000 DPI, that makes it feasible to etch on a variety of materials. The D1 additionally has a built-in mobile phone application that can be downloaded and install from the Android Store or the Apple App Shop. The application can be utilized to import laser designs from complimentary vector websites, including Etsy. The D1 can also be connected to a computer system using USB or WiFi. It can also transfer data by means of Wi-Fi or a big ability TF card.
The D1 is capable of engraving on Poplar plywood, which is one of one of the most generally used woods for laser cutters. The D1 can additionally reduce on various other woods, including tough maple, walnut, and also rosewood. Its laser head is flexible, allowing for a 50mm range. It can also refine products approximately 10mm thick, which implies that it is able to etch on a wide variety of materials. The D1 is created for both house and also service usage.
The XTool D1 can be found in 2 designs: the 20W variation as well as the 5W model. The 20W version has a larger laser head, and also a smaller working area. The 5W model has a workplace of 430 x 400 mm. It has a higher maximum speed of 400 mm/s, that makes it a quicker device. Xtool X100 Pro Honda 2014
The D1 features a steel framework, which offers optimum stability as well as longevity. It additionally has a simultaneous belt to boost motion accuracy. The belt’s moderate tension is needed for precision, specifically when relocating at high speeds. The simultaneous belt can also assist the equipment stay steady and also lessen vibration. It can also eliminate the motion void, permitting great vector graphics at high speeds.
Order Your XTool Laser Products Here – Best Prices Guaranteed
XTool D1 Specification
| Parameter | Value |
|---|---|
|
Engraving Size
|
432 * 406 mm (17 * 16 inch)
|
|
Engraving Materials
|
Wood, Bamboo, Cardboard, Plastic, Leather, PCB Board, Aluminum Oxide, Non-reflective, Electroplating Layer and Paint Surface Layer Metal, 304 Mirror Stainless Steel, Glass, Ceramics, Cotton Cloth, Slate;
|
|
Laser Output Optical Power
|
10W
|
|
Laser Wavelength
|
450nm
|
|
Focusing Method
|
Fixed focus laser
|
|
Operating Software
|
Makeblock LaserBox Basic, LightBurn, Android and iOS
|
|
Input voltage
|
AC100-240V, 50/60Hz
|
|
Weight
|
5kg
|
|
Warranty
|
One Year
|
XTool D1 Laser Diode
XTool D1 Laser Diode is the most powerful diode laser on the market. It creates clear lines to 0.06 mm. This makes it an exceptional choice for nearly all inscribing tasks. Its design is safe as well as trustworthy. It is optimal for local business and hobbyists.
It can etch different kinds of steel and wood. It has the capability to cut eight to tenmm plywood in one pass. It also has the ability to reduce natural leather as well as acrylic.
It includes a number of devices. You can get the package pack that includes the Air Assist Set and Honeycomb Working Panel. It costs $119 and also $269, specifically. You can likewise obtain a 1064nm laser head. This head lowers shed marks in plastic as well as is particularly useful for delicate fashion jewelry layouts. It additionally has an activity sensing unit and fire discovery sensor.
It also includes an emergency situation stop button. It can be controlled through Wi-fi and can import laser styles from complimentary vector websites like Etsy. You can additionally manage it using the Makeblock XTool D1 app on Android and also iphone.
It has a very good emphasis device. The laser crosshairs relocate as needed as well as relocate to the framework of the artwork. This makes the etching very accurate. It can also be utilized to create a thickening effect, which can be helpful when inscribing large products.
The XTool D1 Pro has boosted features and laser power. It utilizes a 20W laser component to develop a beam of light that cuts objects in one pass. It can puncture 8mm black acrylic and 10mm basswood. It additionally has a higher speed. It can get to inscribing accuracy of 0.0004 inches.
XTool D1 Focusing Procedure
The concentrating approach on this maker is extremely clever. Beside the laser module, there is a swivelling arm which you take out when you want to focus the laser. It guarantees that you go down the directly the right range from the product. After that you tighten the thumb screw as well as pivot the arm back up. Xtool X100 Pro Honda 2014
XTool D1 Special Features
Below are some of the top Unique Features of the XTool D1:
Wireless Connection
Equipment can be attached through USB or a Wi-fi. As well as you can also regulate with a mobile phone app on Android or iphone.
Trimming and also Engraving Different Materials
Engrave: Timber, Bamboo, Cardboard, Plastic, Natural Leather, PCB Board, Light Weight Aluminum Oxide, Non-reflective, Electroplating Layer as well as Paint Surface Area Layer Metal, 304 Mirror Stainless Steel, Glass, Ceramics, Cotton Fabric, Slate.
The Makeblock XTool D1 is additionally a very capable laser cutter.
Cut: Cardboard, Non-woven Material, Wood Board, Polymer, Some Thin Plastic Board, Sponge; cardboard …
You can cut greater than 10mm thick stuff with this laser engraver. The maker can reduce wood, especially Poplar plywood which is soft as well as it is the favored wood for all laser cutters.
I would certainly stay clear of some plastics like PVC and also plastic considering that it launches hydrogen chloride gas while being cut. This gas is poisonous and also very destructive (your device will certainly rust quickly).
We have actually checked the maker with engraving and cutting different materials. You will locate the outcomes of our tests few chapters lower.
The Makeblock XTool D1 has steel rollers on all axis as opposed to the plastic ones we have actually seen on all other machines. This should allow for even more precision and less mechanical wobble when engraving at high speeds. Xtool X100 Pro Honda 2014
Advanced Stepper Motor Drivers
The equipment has an extremely advanced controller board. It has Trinamic stepper motor motorists which drive the motors with a pure sine wave. By doing this the motors are extremely accurate and quiet. The motorists likewise support homing treatment without using restriction changes as the drivers measure present with motors and also discover the limit by doing this. This is why this equipment does not require physical restriction switches for homing.
The machine has drivers for 3 axis– so you can plug in the roller system as a Z axis rather than having to detach one of the axis when dealing with a roller system.
XTool D1 Software
XTool D1 can be regulated through Wi-Fi or USB. The laser engraver device immediately quits if an unintended touch occurs. This is fantastic for individuals who are worried regarding security. The tool is also compatible with Windows as well as Mac OS systems.
The XTool D1 software is extremely easy to use. Once you have actually the artwork prepared, you can utilize the application to set up the laser. You can also tailor the laser setups and create personalized artwork. The app also consists of a products list.
XTool D1 Pro is an upgrade to the previous XTool D1 laser cutter. It is a high-accuracy laser cutting device that can etch over 100 materials. The laser engraver device is easy to use and comes with a safety cover. The maker has a guarantee of 12 months.
XTool D1 Engraving
The XTool D1 is an extremely versatile engraving equipment. It cam be made use of to etch on all types of products/.
Right here is a checklist of products as well as features that the XTool D1 flaunts:
- Vector Image Engraving
- Aluminium Engraving
- Acrylic Engraving And Cutting
- Plywood Cutting
- Hardwood Cutting
- Stainless Steel Engraving
- Photo Engraving
FAQ
Is the XTool D1 worth it?
Makeblock XTool D1 is a very well thought out maker. Precise, fast and also solidly constructed. It comes at a premium rate, however it deserves it for someone that desires a good as well as virtually a commercial grade table top laser engraver with the ability of rapid cutting as well as exact engraving thanks to a powerful 10W laser module.
Is XTool better than Glowforge?
The initial laser engraving as well as cutting equipment on our listing is XTool D1 pro, the very best option to Glowforge. It remains in first place due to the fact that it has actually obtained the Red Dot Style 2022 Honor. The impressive design and state-of-the-art technology established this machine in addition to various other makers on the marketplace.
Can the XTool D1 cut wood?
XTool D1-5W can reduce a 4mm basswood board simultaneously, and XTool D1-10W can reduce a 6mm basswood board
How thick wood can XTool D1 cut?
XTool D1-5W can reduce 6mm wood board at once, and XTool D1-10W can cut 10mm timber board at once.
Can XTool D1 cut leather?
XTool can reduce and also engrave a massive range of products, from something as slim as tissue paper to something as thick as natural leather and also wood panels.
XTool D1 is a diode laser engraving and reducing machine that works with a wide variety of materials, consisting of different types of wood. Its effective as well as highly concentrated laser can conveniently reduce as well as engraved wood with ultimate precision and accuracy.
Can the XTool D1 engrave alliminum?
You can also get the infrared laser component, which is specifically created metal as well as plastic inscription. It can engrave various steels, including light weight aluminum and precious metals. It can likewise do tinted etching on different metals, including light weight aluminum.