What is the Makeblock XTool D1? Xtool X100 Pro Auto Key Programmer Manual
XTool D1 is a laser cutter that has actually been created by Makeblock. Xtool X100 Pro Auto Key Programmer Manual
The company was developed in 2012 by Jasen Wang, that examined airplane design at Northwestern Polytechnic University. The business is committed to creating cutting-edge items to assist people reveal themselves with development. Since its creation, Makeblock has released several educational robots, in addition to a coding system for kids. It also introduced the MakeX Robotic Competition.
The XTool D1 is a portable laser engraver that can reducing as well as engraving a variety of products. Its laser can eliminate elaborate shapes much faster than a scroll saw or jigsaw, and also can be used for various tasks. In addition to engraving, the D1 can also be used for other tasks, including creating fashion jewelry as well as light tones.
The D1 is a do it yourself package that can be constructed in only about half an hour. Its room is foldable, enabling very easy mobility and also effective air flow. It is also made of flame-retardant polyester, making it secure from dust fragments. The enclosure likewise secures the working surface under the device.
The XTool D1 is outfitted with a laser module that is capable of engrave on metals and many other products. It has actually an ultra-fine compressed laser place of 0.08 x 0.08 mm. This enables finer engraving and also higher accuracy.
The D1 also has a high resolution of 1000 DPI, which makes it possible to inscribe on a wide variety of products. The D1 additionally has an integrated mobile phone application that can be downloaded from the Android Shop or the Apple Application Store. The application can be made use of to import laser styles from free vector websites, including Etsy. The D1 can additionally be linked to a computer through USB or WiFi. It can also move data using Wi-Fi or a big ability TF card.
The D1 can inscribing on Poplar plywood, which is among the most frequently utilized timbers for laser cutters. The D1 can likewise cut on other woods, consisting of difficult maple, walnut, as well as rosewood. Its laser head is adjustable, permitting a 50mm array. It can additionally refine materials up to 10mm thick, which implies that it is able to engrave on a wide range of products. The D1 is made for both home and also organization use.
The XTool D1 can be found in 2 versions: the 20W variation and the 5W design. The 20W version has a bigger laser head, as well as a smaller working location. The 5W design has a workspace of 430 x 400 mm. It has a greater maximum speed of 400 mm/s, that makes it a quicker equipment. Xtool X100 Pro Auto Key Programmer Manual
The D1 includes a steel structure, which supplies optimum security and also longevity. It also has a simultaneous belt to enhance motion precision. The belt’s modest stress is required for precision, particularly when relocating at high speeds. The simultaneous belt can additionally help the maker keep secure and also decrease resonance. It can also eliminate the movement gap, permitting fine vector graphics at high speeds.
Order Your XTool Laser Products Here – Best Prices Guaranteed
XTool D1 Specification
| Parameter | Value |
|---|---|
|
Engraving Size
|
432 * 406 mm (17 * 16 inch)
|
|
Engraving Materials
|
Wood, Bamboo, Cardboard, Plastic, Leather, PCB Board, Aluminum Oxide, Non-reflective, Electroplating Layer and Paint Surface Layer Metal, 304 Mirror Stainless Steel, Glass, Ceramics, Cotton Cloth, Slate;
|
|
Laser Output Optical Power
|
10W
|
|
Laser Wavelength
|
450nm
|
|
Focusing Method
|
Fixed focus laser
|
|
Operating Software
|
Makeblock LaserBox Basic, LightBurn, Android and iOS
|
|
Input voltage
|
AC100-240V, 50/60Hz
|
|
Weight
|
5kg
|
|
Warranty
|
One Year
|
XTool D1 Laser Diode
XTool D1 Laser Diode is one of the most powerful diode laser on the marketplace. It generates clear lines down to 0.06 mm. This makes it an outstanding choice for mostly all etching jobs. Its layout is safe and also trustworthy. It is ideal for small companies and hobbyists.
It can engrave different sorts of steel and timber. It has the ability to cut 8 to tenmm plywood in one pass. It likewise has the capacity to reduce natural leather and polymer.
It comes with a variety of accessories. You can buy the package pack that includes the Air Assist Establish and Honeycomb Working Panel. It sets you back $119 as well as $269, respectively. You can additionally get a 1064nm laser head. This head minimizes melt marks in plastic and is particularly useful for delicate jewelry designs. It also has a movement sensing unit as well as fire detection sensor.
It also includes an emergency situation stop button. It can be regulated through WiFi as well as can import laser designs from totally free vector websites like Etsy. You can additionally control it via the Makeblock XTool D1 app on Android as well as iphone.
It has a great focus device. The laser crosshairs move as needed and also relocate to the structure of the artwork. This makes the engraving really exact. It can additionally be used to produce a thickening effect, which can be helpful when engraving big things.
The XTool D1 Pro has actually boosted attributes and laser power. It uses a 20W laser module to produce a beam of light that reduces things in one pass. It can cut through 8mm black acrylic and also 10mm basswood. It also has a greater speed. It can reach inscribing accuracy of 0.0004 inches.
XTool D1 Focusing Procedure
The focusing method on this device is extremely clever. Beside the laser module, there is a rotating arm which you pull out when you wish to concentrate the laser. It ensures that you go down the head on the appropriate distance from the material. Then you tighten up the thumb screw and also pivot the arm back up. Xtool X100 Pro Auto Key Programmer Manual
XTool D1 Special Features
Below are several of the top Special Functions of the XTool D1:
Wireless Connection
Device can be attached by means of USB or a Wi-fi. And also you can likewise control with a mobile phone app on Android or iOS.
Trimming and also Engraving Different Materials
Engrave: Timber, Bamboo, Cardboard, Plastic, Leather, PCB Board, Aluminum Oxide, Non-reflective, Electroplating Layer and also Paint Surface Layer Metal, 304 Mirror Stainless-steel, Glass, Ceramics, Cotton Towel, Slate.
The Makeblock XTool D1 is additionally a very qualified laser cutter.
Cut: Cardboard, Non-woven Textile, Timber Board, Acrylic, Some Thin Plastic Board, Sponge; cardboard …
You can reduce greater than 10mm thick stuff with this laser engraver. The equipment can cut wood, particularly Poplar plywood which is soft and also it is the preferred timber for all laser cutters.
I would avoid some plastics like PVC and also vinyl because it launches hydrogen chloride gas while being cut. This gas is harmful as well as extremely corrosive (your maker will certainly rust swiftly).
We have examined the maker with inscription and reducing different materials. You will find the outcomes of our tests few chapters lower.
The Makeblock XTool D1 has steel rollers on all axis as opposed to the plastic ones we have seen on all other machines. This must permit more precision and also less mechanical wobble when etching at high speeds. Xtool X100 Pro Auto Key Programmer Manual
Advanced Stepper Motor Drivers
The device has an extremely innovative controller board. It has Trinamic stepper electric motor vehicle drivers which drive the electric motors with a pure sine wave. This way the motors are extremely accurate and quiet. The vehicle drivers additionally support homing procedure without using restriction switches as the vehicle drivers gauge current with motors and also spot the limit in this manner. This is why this device does not require physical limit changes for homing.
The machine has drivers for 3 axis– so you can plug in the roller system as a Z axis as opposed to needing to detach among the axis when dealing with a roller system.
XTool D1 Software
XTool D1 can be regulated via Wi-Fi or USB. The laser engraver tool immediately quits if an unexpected touch occurs. This is great for people who are concerned regarding safety. The device is also suitable with Windows as well as Mac OS systems.
The XTool D1 software is very easy to use. As soon as you have the art work prepared, you can utilize the app to establish the laser. You can also tailor the laser setups and also develop customized art work. The app also consists of a materials checklist.
XTool D1 Pro is an upgrade to the previous XTool D1 laser cutter. It is a high-accuracy laser cutting device that can inscribe over 100 products. The laser engraver tool is easy to use and features a protective cover. The maker has a warranty of twelve month.
XTool D1 Engraving
The XTool D1 is a really flexible etching machine. It cam be used to inscribe on all sorts of products/.
Here is a listing of products and functions that the XTool D1 boasts:
- Vector Image Engraving
- Aluminium Engraving
- Acrylic Engraving And Cutting
- Plywood Cutting
- Hardwood Cutting
- Stainless Steel Engraving
- Photo Engraving
FAQ
Is the XTool D1 worth it?
Makeblock XTool D1 is a quite possibly thought out equipment. Precise, quick as well as well constructed. It comes at a costs cost, however it deserves it for someone that desires a great as well as nearly an industrial quality table top laser engraver efficient in fast cutting as well as accurate engraving thanks to a powerful 10W laser component.
Is XTool better than Glowforge?
The very first laser engraving as well as cutting device on our listing is XTool D1 pro, the very best choice to Glowforge. It remains in top place due to the fact that it has gotten the Red Dot Style 2022 Honor. The exceptional design and modern technology established this maker in addition to other makers on the market.
Can the XTool D1 cut wood?
XTool D1-5W can reduce a 4mm basswood board at once, and also XTool D1-10W can reduce a 6mm basswood board
How thick wood can XTool D1 cut?
XTool D1-5W can cut 6mm timber board at once, and XTool D1-10W can cut 10mm timber board at one time.
Can XTool D1 cut leather?
XTool can reduce as well as inscribe a huge selection of materials, from something as slim as cells paper to something as thick as natural leather as well as timber panels.
XTool D1 is a diode laser inscription as well as cutting machine that is compatible with a wide range of products, consisting of various types of wood. Its powerful and very focused laser can conveniently reduce and also inscribed timber with supreme accuracy and accuracy.
Can the XTool D1 engrave alliminum?
You can also obtain the infrared laser module, which is particularly produced metal and plastic inscription. It can inscribe various metals, including light weight aluminum and rare-earth elements. It can also do colored etching on different steels, including aluminum.
Xtool X100 Pro Auto Key Programmer Manual Xtool X100 Pro Auto Key Programmer Manual