What is the Makeblock XTool D1? Xtool X100 Pad 2 Pro
XTool D1 is a laser cutter that has actually been developed by Makeblock. Xtool X100 Pad 2 Pro
The firm was established in 2012 by Jasen Wang, who researched aircraft design at Northwestern Polytechnic College. The company is devoted to producing cutting-edge items to aid people share themselves through development. Since its creation, Makeblock has actually launched a number of academic robotics, along with a coding system for youngsters. It likewise launched the MakeX Robot Competitors.
The XTool D1 is a portable laser engraver that is capable of cutting as well as etching a variety of products. Its laser can cut out complex shapes much faster than a scroll saw or jigsaw, and also can be utilized for several tasks. In addition to engraving, the D1 can likewise be made use of for other jobs, consisting of developing precious jewelry as well as light shades.
The D1 is a DIY kit that can be constructed in just concerning half a hr. Its room is collapsible, allowing for very easy portability and also reliable air flow. It is likewise constructed from flame-retardant polyester, making it secure from dirt bits. The enclosure additionally secures the working surface under the device.
The XTool D1 is equipped with a laser component that can engrave on steels and also several other materials. It has actually an ultra-fine pressed laser area of 0.08 x 0.08 mm. This enables finer engraving and higher precision.
The D1 additionally has a high resolution of 1000 DPI, that makes it possible to inscribe on a vast array of products. The D1 likewise has a built-in smartphone application that can be downloaded and install from the Android Store or the Apple Application Shop. The application can be used to import laser designs from complimentary vector websites, consisting of Etsy. The D1 can additionally be attached to a computer by means of USB or WiFi. It can also transfer data by means of Wi-Fi or a big capability TF card.
The D1 is capable of inscribing on Poplar plywood, which is just one of one of the most typically made use of woods for laser cutters. The D1 can likewise cut on various other timbers, consisting of hard maple, walnut, and also rosewood. Its laser head is adjustable, permitting a 50mm variety. It can also refine products as much as 10mm thick, which indicates that it has the ability to etch on a wide array of materials. The D1 is developed for both home and also organization use.
The XTool D1 comes in 2 designs: the 20W version and also the 5W design. The 20W version has a larger laser head, and a smaller working location. The 5W design has a working area of 430 x 400 mm. It has a greater maximum speed of 400 mm/s, which makes it a faster device. Xtool X100 Pad 2 Pro
The D1 features a steel framework, which offers maximum security and also toughness. It likewise has a synchronous belt to boost motion precision. The belt’s moderate stress is required for precision, particularly when moving at high speeds. The concurrent belt can additionally assist the device stay secure and also lessen vibration. It can also eliminate the movement space, permitting great vector graphics at broadband.
Order Your XTool Laser Products Here – Best Prices Guaranteed
XTool D1 Specification
| Parameter | Value |
|---|---|
|
Engraving Size
|
432 * 406 mm (17 * 16 inch)
|
|
Engraving Materials
|
Wood, Bamboo, Cardboard, Plastic, Leather, PCB Board, Aluminum Oxide, Non-reflective, Electroplating Layer and Paint Surface Layer Metal, 304 Mirror Stainless Steel, Glass, Ceramics, Cotton Cloth, Slate;
|
|
Laser Output Optical Power
|
10W
|
|
Laser Wavelength
|
450nm
|
|
Focusing Method
|
Fixed focus laser
|
|
Operating Software
|
Makeblock LaserBox Basic, LightBurn, Android and iOS
|
|
Input voltage
|
AC100-240V, 50/60Hz
|
|
Weight
|
5kg
|
|
Warranty
|
One Year
|
XTool D1 Laser Diode
XTool D1 Laser Diode is the most effective diode laser on the market. It generates clear lines down to 0.06 mm. This makes it an excellent choice for mostly all engraving tasks. Its design is safe and also trustworthy. It is ideal for local business as well as hobbyists.
It can engrave different types of metal and wood. It has the ability to reduce eight to tenmm plywood in one pass. It additionally has the capability to cut natural leather as well as acrylic.
It features a number of accessories. You can acquire the bundle pack that includes the Air Assist Establish and Honeycomb Working Panel. It sets you back $119 as well as $269, respectively. You can also obtain a 1064nm laser head. This head lowers melt marks in plastic and also is especially useful for delicate jewelry designs. It additionally has an activity sensing unit and also flame discovery sensing unit.
It likewise features an emergency stop switch. It can be managed with WiFi as well as can import laser designs from totally free vector websites like Etsy. You can likewise control it by means of the Makeblock XTool D1 application on Android as well as iphone.
It has a great focus mechanism. The laser crosshairs move as required and move to the frame of the art work. This makes the engraving extremely exact. It can also be made use of to produce a thickening impact, which can be beneficial when inscribing huge items.
The XTool D1 Pro has boosted attributes as well as laser power. It makes use of a 20W laser module to produce a beam that reduces objects in one pass. It can cut through 8mm black acrylic and 10mm basswood. It additionally has a greater speed. It can reach etching precision of 0.0004 inches.
XTool D1 Focusing Procedure
The concentrating method on this equipment is very creative. Beside the laser module, there is a pivoting arm which you pull out when you want to focus the laser. It assures that you go down the head on the correct range from the product. After that you tighten up the thumb screw and swivel the arm back up. Xtool X100 Pad 2 Pro
XTool D1 Special Features
Here are a few of the leading Special Functions of the XTool D1:
Wireless Connection
Equipment can be attached through USB or a Wi-fi. And you can additionally control with a mobile phone application on Android or iphone.
Trimming and also Engraving Different Materials
Engrave: Timber, Bamboo, Cardboard, Plastic, Leather, PCB Board, Light Weight Aluminum Oxide, Non-reflective, Electroplating Layer as well as Paint Surface Layer Steel, 304 Mirror Stainless-steel, Glass, Ceramics, Cotton Fabric, Slate.
The Makeblock XTool D1 is also a very capable laser cutter.
Cut: Cardboard, Non-woven Fabric, Wood Board, Acrylic, Some Thin Plastic Board, Sponge; cardboard …
You can reduce greater than 10mm thick things with this laser engraver. The equipment can reduce timber, specifically Poplar plywood which is soft and also it is the recommended wood for all laser cutters.
I would avoid some plastics like PVC as well as vinyl since it releases hydrogen chloride gas while being reduced. This gas is toxic as well as extremely corrosive (your maker will rust quickly).
We have tested the machine with inscription and also reducing various materials. You will certainly find the outcomes of our examinations couple of phases lower.
The Makeblock XTool D1 has steel rollers on all axis rather than the plastic ones we have actually seen on all various other machines. This ought to enable more accuracy and much less mechanical wobble when engraving at broadband. Xtool X100 Pad 2 Pro
Advanced Stepper Motor Drivers
The equipment has a very advanced controller board. It has Trinamic stepper electric motor drivers which drive the electric motors with a pure sine wave. In this manner the motors are really specific and also quiet. The vehicle drivers also sustain homing treatment without utilizing limitation changes as the vehicle drivers determine existing with motors as well as identify the limit in this manner. This is why this equipment does not need physical limit switches for homing.
The machine has drivers for 3 axis– so you can plug in the roller system as a Z axis as opposed to having to detach one of the axis when collaborating with a roller system.
XTool D1 Software
XTool D1 can be controlled through Wi-Fi or USB. The laser engraver device instantly quits if an unintentional touch occurs. This is excellent for people who are worried concerning safety. The device is likewise suitable with Windows and also Mac OS systems.
The XTool D1 software application is very easy to use. As soon as you have actually the art work prepared, you can utilize the app to establish the laser. You can also customize the laser setups as well as develop custom-made artwork. The app likewise includes a products list.
XTool D1 Pro is an upgrade to the previous XTool D1 laser cutter. It is a high-accuracy laser reducing equipment that can inscribe over 100 materials. The laser engraver device is easy to use as well as comes with a protective cover. The machine has a guarantee of twelve month.
XTool D1 Engraving
The XTool D1 is a very versatile etching device. It cam be made use of to inscribe on all sorts of materials/.
Below is a checklist of materials as well as attributes that the XTool D1 flaunts:
- Vector Image Engraving
- Aluminium Engraving
- Acrylic Engraving And Cutting
- Plywood Cutting
- Hardwood Cutting
- Stainless Steel Engraving
- Photo Engraving
FAQ
Is the XTool D1 worth it?
Makeblock XTool D1 is an effectively considered maker. Accurate, fast and also well developed. It comes with a costs rate, yet it is worth it for a person that desires a good and also virtually a commercial grade table top laser engraver capable of rapid cutting and precise inscription thanks to an effective 10W laser module.
Is XTool better than Glowforge?
The first laser inscription and reducing machine on our list is XTool D1 pro, the best choice to Glowforge. It remains in top place because it has obtained the Red Dot Layout 2022 Award. The impressive style and also advanced modern technology set this equipment apart from various other machines on the marketplace.
Can the XTool D1 cut wood?
XTool D1-5W can reduce a 4mm basswood board simultaneously, as well as XTool D1-10W can reduce a 6mm basswood board
How thick wood can XTool D1 cut?
XTool D1-5W can reduce 6mm timber board at once, and also XTool D1-10W can reduce 10mm wood board at once.
Can XTool D1 cut leather?
XTool can cut and etch a massive selection of products, from something as slim as cells paper to something as thick as leather as well as wood panels.
XTool D1 is a diode laser inscription and reducing equipment that is compatible with a wide variety of products, consisting of various sorts of timber. Its powerful and also extremely focused laser can conveniently reduce and inscribed wood with supreme precision and precision.
Can the XTool D1 engrave alliminum?
You can likewise get the infrared laser component, which is particularly created metal as well as plastic engraving. It can inscribe various metals, including light weight aluminum and rare-earth elements. It can additionally do colored engraving on numerous steels, consisting of aluminum.