What is the Makeblock XTool D1? Xtool Vag401 Cruise Control
XTool D1 is a laser cutter that has been produced by Makeblock. Xtool Vag401 Cruise Control
The company was developed in 2012 by Jasen Wang, that researched airplane design at Northwestern Polytechnic College. The firm is committed to developing cutting-edge items to aid people express themselves through creation. Because its production, Makeblock has released a number of educational robots, in addition to a coding platform for children. It additionally launched the MakeX Robot Competition.
The XTool D1 is a portable laser engraver that is capable of cutting as well as engraving a variety of products. Its laser can cut out elaborate forms much faster than a scroll saw or jigsaw, and also can be used for several projects. In addition to engraving, the D1 can likewise be made use of for various other projects, consisting of producing precious jewelry and also light tones.
The D1 is a DIY package that can be assembled in just regarding half a hr. Its unit is foldable, allowing for very easy mobility as well as effective ventilation. It is likewise constructed from flame-retardant polyester, making it risk-free from dust particles. The enclosure additionally shields the functioning surface area under the maker.
The XTool D1 is equipped with a laser component that is capable of engrave on metals and lots of various other products. It has actually an ultra-fine compressed laser area of 0.08 x 0.08 mm. This permits finer inscription and greater accuracy.
The D1 also has a high resolution of 1000 DPI, which makes it possible to engrave on a large range of products. The D1 also has a built-in mobile phone app that can be downloaded from the Android Store or the Apple App Store. The app can be utilized to import laser layouts from totally free vector websites, consisting of Etsy. The D1 can additionally be linked to a computer using USB or WiFi. It can additionally transfer data through Wi-Fi or a large capacity TF card.
The D1 is capable of inscribing on Poplar plywood, which is one of one of the most frequently utilized woods for laser cutters. The D1 can likewise reduce on other timbers, consisting of difficult maple, walnut, and rosewood. Its laser head is flexible, enabling a 50mm variety. It can also process products approximately 10mm thick, which indicates that it is able to engrave on a wide variety of materials. The D1 is created for both house and also business use.
The XTool D1 can be found in two designs: the 20W version and the 5W version. The 20W version has a larger laser head, and a smaller sized working area. The 5W model has a workplace of 430 x 400 mm. It has a higher maximum speed of 400 mm/s, that makes it a quicker maker. Xtool Vag401 Cruise Control
The D1 features a steel frame, which offers optimum security as well as resilience. It additionally has a simultaneous belt to improve movement precision. The belt’s moderate stress is required for precision, specifically when relocating at high speeds. The simultaneous belt can also assist the device remain secure and lessen resonance. It can likewise eliminate the activity gap, allowing for great vector graphics at broadband.
Order Your XTool Laser Products Here – Best Prices Guaranteed
XTool D1 Specification
| Parameter | Value |
|---|---|
|
Engraving Size
|
432 * 406 mm (17 * 16 inch)
|
|
Engraving Materials
|
Wood, Bamboo, Cardboard, Plastic, Leather, PCB Board, Aluminum Oxide, Non-reflective, Electroplating Layer and Paint Surface Layer Metal, 304 Mirror Stainless Steel, Glass, Ceramics, Cotton Cloth, Slate;
|
|
Laser Output Optical Power
|
10W
|
|
Laser Wavelength
|
450nm
|
|
Focusing Method
|
Fixed focus laser
|
|
Operating Software
|
Makeblock LaserBox Basic, LightBurn, Android and iOS
|
|
Input voltage
|
AC100-240V, 50/60Hz
|
|
Weight
|
5kg
|
|
Warranty
|
One Year
|
XTool D1 Laser Diode
XTool D1 Laser Diode is the most powerful diode laser on the market. It generates clear lines to 0.06 mm. This makes it an exceptional choice for nearly all engraving jobs. Its design is risk-free as well as trustworthy. It is perfect for local business and enthusiasts.
It can etch different types of steel as well as wood. It has the capability to cut 8 to tenmm plywood in one pass. It also has the capability to cut natural leather as well as polymer.
It comes with a number of devices. You can purchase the package pack that includes the Air Help Establish as well as Honeycomb Working Panel. It costs $119 and also $269, specifically. You can additionally get a 1064nm laser head. This head minimizes melt marks in plastic and is especially valuable for fragile fashion jewelry designs. It likewise has a motion sensing unit and also flame detection sensing unit.
It also features an emergency situation quit button. It can be managed through WiFi as well as can import laser styles from totally free vector websites like Etsy. You can additionally control it via the Makeblock XTool D1 app on Android and also iOS.
It has an excellent emphasis mechanism. The laser crosshairs move as needed and also relocate to the structure of the artwork. This makes the engraving really exact. It can also be used to produce a thickening impact, which can be beneficial when etching huge items.
The XTool D1 Pro has actually boosted functions and also laser power. It utilizes a 20W laser module to create a light beam that reduces items in one pass. It can puncture 8mm black acrylic and also 10mm basswood. It also has a greater rate. It can reach etching precision of 0.0004 inches.
XTool D1 Focusing Procedure
The focusing technique on this device is very creative. Next to the laser module, there is a rotating arm which you take out when you intend to concentrate the laser. It assures that you go down the head on the proper range from the material. After that you tighten up the thumb screw and pivot the arm back up. Xtool Vag401 Cruise Control
XTool D1 Special Features
Below are a few of the top Special Attributes of the XTool D1:
Wireless Connectivity
Device can be connected via USB or a Wi-fi. And you can additionally regulate with a mobile phone application on Android or iphone.
Cutting as well as Engraving Different Materials
Engrave: Wood, Bamboo, Cardboard, Plastic, Leather, PCB Board, Light Weight Aluminum Oxide, Non-reflective, Electroplating Layer as well as Paint Surface Layer Steel, 304 Mirror Stainless Steel, Glass, Ceramics, Cotton Towel, Slate.
The Makeblock XTool D1 is likewise an extremely capable laser cutter.
Cut: Cardboard, Non-woven Material, Timber Board, Polymer, Some Thin Plastic Board, Sponge; cardboard …
You can cut more than 10mm thick stuff with this laser engraver. The machine can cut wood, particularly Poplar plywood which is soft as well as it is the recommended wood for all laser cutters.
I would certainly stay clear of some plastics like PVC as well as plastic because it launches hydrogen chloride gas while being reduced. This gas is toxic and also really harsh (your device will certainly corrosion swiftly).
We have evaluated the maker with inscription as well as reducing different products. You will certainly discover the results of our examinations couple of phases lower.
The Makeblock XTool D1 has steel rollers on all axis instead of the plastic ones we have actually seen on all various other devices. This need to permit even more accuracy as well as much less mechanical wobble when etching at high speeds. Xtool Vag401 Cruise Control
Advanced Stepper Motor Drivers
The device has an extremely advanced controller board. It has Trinamic stepper motor vehicle drivers which drive the electric motors with a pure sine wave. This way the motors are very specific as well as quiet. The vehicle drivers additionally support homing treatment without utilizing limit switches over as the drivers determine current through electric motors and identify the limit by doing this. This is why this device does not require physical limit switches for homing.
The maker has chauffeurs for 3 axis– so you can plug in the roller system as a Z axis as opposed to having to disconnect among the axis when collaborating with a roller system.
XTool D1 Software
XTool D1 can be controlled via Wi-Fi or USB. The laser engraver device automatically stops if an unintended touch takes place. This is terrific for people that are worried about safety. The device is likewise suitable with Windows and Mac OS systems.
The XTool D1 software is extremely easy to use. When you have actually the artwork prepared, you can make use of the application to establish the laser. You can also personalize the laser settings and also produce personalized artwork. The application likewise consists of a materials listing.
XTool D1 Pro is an upgrade to the previous XTool D1 laser cutter. It is a high-accuracy laser cutting maker that can engrave over 100 materials. The laser engraver tool is easy to use and features a protective cover. The machine has a service warranty of year.
XTool D1 Engraving
The XTool D1 is an extremely versatile inscribing maker. It cam be made use of to etch on all kinds of products/.
Here is a listing of products and functions that the XTool D1 boasts:
- Vector Image Engraving
- Aluminium Engraving
- Acrylic Engraving And Cutting
- Plywood Cutting
- Hardwood Cutting
- Stainless Steel Engraving
- Photo Engraving
FAQ
Is the XTool D1 worth it?
Makeblock XTool D1 is a very well thought out maker. Specific, rapid as well as solidly constructed. It comes at a costs price, but it deserves it for someone that desires a good as well as nearly an industrial quality table leading laser engraver efficient in rapid cutting and specific inscription thanks to an effective 10W laser module.
Is XTool better than Glowforge?
The initial laser engraving and cutting maker on our list is XTool D1 pro, the best option to Glowforge. It is in top place since it has actually gotten the Red Dot Design 2022 Honor. The impressive design and advanced modern technology set this device in addition to various other equipments on the market.
Can the XTool D1 cut wood?
XTool D1-5W can reduce a 4mm basswood board at the same time, and also XTool D1-10W can cut a 6mm basswood board
How thick wood can XTool D1 cut?
XTool D1-5W can reduce 6mm timber board at one time, and XTool D1-10W can reduce 10mm timber board at one time.
Can XTool D1 cut leather?
XTool can cut as well as etch a huge selection of products, from something as slim as cells paper to something as thick as leather and timber panels.
XTool D1 is a diode laser inscription and cutting device that is compatible with a large range of materials, consisting of different types of timber. Its powerful and also highly concentrated laser can easily cut as well as engraved wood with ultimate precision as well as accuracy.
Can the XTool D1 engrave alliminum?
You can additionally obtain the infrared laser module, which is specifically created steel and plastic inscription. It can engrave different steels, including light weight aluminum and also rare-earth elements. It can additionally do tinted inscribing on different metals, including aluminum.