What is the Makeblock XTool D1? Xtool Pro 16
XTool D1 is a laser cutter that has actually been developed by Makeblock. Xtool Pro 16
The business was established in 2012 by Jasen Wang, that examined airplane design at Northwestern Polytechnic College. The business is devoted to creating innovative products to assist individuals reveal themselves through creation. Because its production, Makeblock has released several educational robotics, as well as a coding system for youngsters. It additionally introduced the MakeX Robotic Competitors.
The XTool D1 is a mobile laser engraver that is capable of cutting as well as inscribing a range of materials. Its laser can remove elaborate shapes much faster than a scroll saw or jigsaw, as well as can be used for various tasks. In addition to inscription, the D1 can additionally be utilized for other tasks, consisting of creating precious jewelry and also lamp shades.
The D1 is a do it yourself set that can be put together in only regarding half a hr. Its room is collapsible, allowing for easy mobility and effective air flow. It is likewise made from flame-retardant polyester, making it safe from dust fragments. The enclosure likewise protects the working surface area under the equipment.
The XTool D1 is equipped with a laser component that is capable of engrave on steels and also many various other products. It has actually an ultra-fine compressed laser area of 0.08 x 0.08 mm. This enables finer engraving as well as greater accuracy.
The D1 additionally has a high resolution of 1000 DPI, that makes it possible to etch on a wide range of products. The D1 additionally has a built-in mobile phone application that can be downloaded from the Android Shop or the Apple App Store. The app can be utilized to import laser layouts from free vector sites, including Etsy. The D1 can also be linked to a computer using USB or WiFi. It can additionally transfer information via Wi-Fi or a large ability TF card.
The D1 is capable of engraving on Poplar plywood, which is among the most frequently utilized timbers for laser cutters. The D1 can additionally reduce on other timbers, consisting of difficult maple, walnut, as well as rosewood. Its laser head is adjustable, allowing for a 50mm variety. It can also process products up to 10mm thick, which suggests that it has the ability to engrave on a wide range of materials. The D1 is made for both house and also service use.
The XTool D1 comes in two versions: the 20W version as well as the 5W version. The 20W version has a bigger laser head, as well as a smaller working location. The 5W version has a workplace of 430 x 400 mm. It has a higher maximum speed of 400 mm/s, that makes it a quicker maker. Xtool Pro 16
The D1 features a steel frame, which offers maximum security and also toughness. It additionally has a concurrent belt to enhance movement precision. The belt’s moderate tension is required for precision, particularly when moving at broadband. The synchronous belt can additionally aid the maker stay stable and also decrease vibration. It can additionally remove the activity void, allowing for fine vector graphics at high speeds.
Order Your XTool Laser Products Here – Best Prices Guaranteed
XTool D1 Specification
| Parameter | Value |
|---|---|
|
Engraving Size
|
432 * 406 mm (17 * 16 inch)
|
|
Engraving Materials
|
Wood, Bamboo, Cardboard, Plastic, Leather, PCB Board, Aluminum Oxide, Non-reflective, Electroplating Layer and Paint Surface Layer Metal, 304 Mirror Stainless Steel, Glass, Ceramics, Cotton Cloth, Slate;
|
|
Laser Output Optical Power
|
10W
|
|
Laser Wavelength
|
450nm
|
|
Focusing Method
|
Fixed focus laser
|
|
Operating Software
|
Makeblock LaserBox Basic, LightBurn, Android and iOS
|
|
Input voltage
|
AC100-240V, 50/60Hz
|
|
Weight
|
5kg
|
|
Warranty
|
One Year
|
XTool D1 Laser Diode
XTool D1 Laser Diode is the most effective diode laser on the market. It generates clear lines down to 0.06 mm. This makes it a superb option for almost all inscribing tasks. Its design is secure and trustworthy. It is suitable for small companies and enthusiasts.
It can etch various kinds of metal and timber. It has the ability to cut eight to tenmm plywood in one pass. It likewise has the capability to reduce natural leather as well as polymer.
It includes a number of devices. You can buy the package pack that includes the Air Assist Establish and also Honeycomb Working Panel. It costs $119 as well as $269, specifically. You can likewise obtain a 1064nm laser head. This head minimizes melt marks in plastic and is specifically beneficial for fragile fashion jewelry layouts. It additionally has an activity sensing unit and also flame discovery sensor.
It also features an emergency situation stop switch. It can be managed via WiFi and also can import laser styles from free vector sites like Etsy. You can likewise control it by means of the Makeblock XTool D1 app on Android and also iOS.
It has an excellent emphasis device. The laser crosshairs relocate as needed as well as transfer to the framework of the art work. This makes the engraving really accurate. It can likewise be made use of to create a thickening result, which can be valuable when engraving large products.
The XTool D1 Pro has enhanced features as well as laser power. It uses a 20W laser component to create a beam of light that cuts objects in one pass. It can cut through 8mm black acrylic and also 10mm basswood. It also has a greater rate. It can get to etching accuracy of 0.0004 inches.
XTool D1 Focusing Procedure
The concentrating method on this maker is very creative. Next to the laser component, there is a pivoting arm which you pull out when you wish to concentrate the laser. It assures that you go down the head on the right range from the material. Then you tighten the thumb screw as well as swivel the arm back up. Xtool Pro 16
XTool D1 Special Features
Here are some of the top Special Attributes of the XTool D1:
Wireless Connectivity
Equipment can be attached through USB or a Wi-fi. As well as you can additionally manage with a smartphone application on Android or iOS.
Cutting as well as Inscription Different Products
Engrave: Timber, Bamboo, Cardboard, Plastic, Natural Leather, PCB Board, Aluminum Oxide, Non-reflective, Electroplating Layer and Paint Surface Area Layer Steel, 304 Mirror Stainless Steel, Glass, Ceramics, Cotton Cloth, Slate.
The Makeblock XTool D1 is likewise an extremely capable laser cutter.
Cut: Cardboard, Non-woven Textile, Timber Board, Polymer, Some Thin Plastic Board, Sponge; cardboard …
You can reduce more than 10mm thick stuff with this laser engraver. The maker can reduce timber, particularly Poplar plywood which is soft and also it is the recommended wood for all laser cutters.
I would certainly prevent some plastics like PVC and plastic considering that it releases hydrogen chloride gas while being reduced. This gas is poisonous and also really corrosive (your machine will corrosion swiftly).
We have tested the equipment with engraving as well as reducing various materials. You will discover the outcomes of our tests few chapters lower.
The Makeblock XTool D1 has steel rollers on all axis as opposed to the plastic ones we have seen on all various other equipments. This need to enable even more accuracy and also much less mechanical wobble when etching at broadband. Xtool Pro 16
Advanced Stepper Motor Drivers
The device has a very sophisticated controller board. It has Trinamic stepper electric motor vehicle drivers which drive the motors with a pure sine wave. In this manner the motors are extremely specific as well as quiet. The drivers also support homing procedure without utilizing restriction switches as the vehicle drivers measure existing through electric motors and discover the limit in this manner. This is why this maker does not require physical limit switches over for homing.
The device has chauffeurs for 3 axis– so you can plug in the roller system as a Z axis instead of having to disconnect among the axis when collaborating with a roller system.
XTool D1 Software
XTool D1 can be managed by means of Wi-Fi or USB. The laser engraver tool automatically stops if an accidental touch occurs. This is fantastic for individuals that are concerned concerning safety. The tool is additionally compatible with Windows and also Mac OS systems.
The XTool D1 software program is very easy to use. When you have the art work prepared, you can make use of the application to set up the laser. You can additionally tailor the laser setups as well as create personalized artwork. The application also consists of a materials listing.
XTool D1 Pro is an upgrade to the previous XTool D1 laser cutter. It is a high-accuracy laser cutting maker that can inscribe over 100 products. The laser engraver device is easy to use and also includes a safety cover. The maker has a warranty of year.
XTool D1 Engraving
The XTool D1 is a very functional inscribing device. It cam be utilized to engrave on all kinds of materials/.
Right here is a checklist of products and features that the XTool D1 boasts:
- Vector Image Engraving
- Aluminium Engraving
- Acrylic Engraving And Cutting
- Plywood Cutting
- Hardwood Cutting
- Stainless Steel Engraving
- Photo Engraving
FAQ
Is the XTool D1 worth it?
Makeblock XTool D1 is an extremely well thought out equipment. Precise, quick and solidly developed. It comes with a premium cost, yet it is worth it for somebody that wants a great as well as practically an industrial quality table leading laser engraver with the ability of fast cutting and also specific inscription thanks to a powerful 10W laser component.
Is XTool better than Glowforge?
The very first laser inscription and also reducing machine on our listing is XTool D1 pro, the best option to Glowforge. It remains in top place due to the fact that it has gotten the Red Dot Layout 2022 Award. The superior style and advanced technology set this maker in addition to other devices on the market.
Can the XTool D1 cut wood?
XTool D1-5W can reduce a 4mm basswood board at once, as well as XTool D1-10W can reduce a 6mm basswood board
How thick wood can XTool D1 cut?
XTool D1-5W can reduce 6mm wood board at once, and also XTool D1-10W can cut 10mm timber board at one time.
Can XTool D1 cut leather?
XTool can cut and also etch a significant variety of materials, from something as slim as cells paper to something as thick as natural leather and also wood panels.
XTool D1 is a diode laser inscription and cutting maker that is compatible with a variety of materials, including different types of wood. Its powerful as well as extremely focused laser can quickly reduce and also engraved wood with best accuracy and accuracy.
Can the XTool D1 engrave alliminum?
You can additionally get the infrared laser component, which is particularly produced steel and plastic inscription. It can inscribe various steels, including aluminum and also precious metals. It can likewise do colored etching on numerous steels, including light weight aluminum.