Xtool M1 Specs – All You Need to Know

Xtool M1 Specs

What is the Makeblock XTool D1? Xtool M1 Specs

XTool D1 is a laser cutter that has actually been created by Makeblock. Xtool M1 Specs

The company was established in 2012 by Jasen Wang, that examined airplane design at Northwestern Polytechnic University. The business is committed to creating cutting-edge items to assist individuals express themselves with production. Considering that its development, Makeblock has released numerous instructional robots, along with a coding system for children. It likewise released the MakeX Robot Competitors.

The XTool D1 is a mobile laser engraver that is capable of reducing and engraving a selection of products. Its laser can cut out complex shapes much faster than a scroll saw or jigsaw, as well as can be made use of for many different tasks. In addition to inscription, the D1 can additionally be made use of for various other tasks, consisting of creating precious jewelry and light tones.

The D1 is a DIY set that can be assembled in just concerning half an hour. Its room is collapsible, allowing for very easy mobility and effective ventilation. It is also made from flame-retardant polyester, making it risk-free from dirt particles. The unit also safeguards the working surface under the machine.

The XTool D1 is geared up with a laser component that is capable of engrave on metals and also numerous other products. It has actually an ultra-fine compressed laser area of 0.08 x 0.08 mm. This allows for finer inscription and greater accuracy.

The D1 likewise has a high resolution of 1000 DPI, that makes it feasible to inscribe on a variety of products. The D1 additionally has a built-in smart device app that can be downloaded and install from the Android Shop or the Apple App Store. The application can be made use of to import laser designs from totally free vector sites, consisting of Etsy. The D1 can additionally be connected to a computer system through USB or WiFi. It can also transfer data via Wi-Fi or a huge ability TF card.

The D1 can engraving on Poplar plywood, which is one of one of the most typically made use of woods for laser cutters. The D1 can likewise reduce on various other woods, consisting of hard maple, walnut, as well as rosewood. Its laser head is adjustable, allowing for a 50mm range. It can additionally process materials up to 10mm thick, which means that it has the ability to inscribe on a variety of materials. The D1 is made for both residence and also company usage.

The XTool D1 is available in two designs: the 20W version and also the 5W model. The 20W version has a larger laser head, and also a smaller working location. The 5W design has a workspace of 430 x 400 mm. It has a greater maximum speed of 400 mm/s, that makes it a quicker equipment. Xtool M1 Specs

The D1 includes a steel frame, which gives optimum security and also sturdiness. It also has a simultaneous belt to boost activity precision. The belt’s modest tension is needed for accuracy, especially when relocating at high speeds. The synchronous belt can additionally help the machine keep stable as well as decrease resonance. It can likewise eliminate the motion void, permitting fine vector graphics at high speeds.


Order Your XTool Laser Products Here – Best Prices Guaranteed 


XTool D1 Specification

Parameter Value
Engraving Size
432 * 406 mm (17 * 16 inch)
Engraving Materials
Wood, Bamboo, Cardboard, Plastic, Leather, PCB Board, Aluminum Oxide, Non-reflective, Electroplating Layer and Paint Surface Layer Metal, 304 Mirror Stainless Steel, Glass, Ceramics, Cotton Cloth, Slate;
Laser Output Optical Power
10W
Laser Wavelength
450nm
Focusing Method
Fixed focus laser
Operating Software
Makeblock LaserBox Basic, LightBurn, Android and iOS
Input voltage
AC100-240V, 50/60Hz
Weight
5kg
Warranty
One Year

XTool D1 Laser Diode

XTool D1 Laser Diode is one of the most powerful diode laser on the marketplace. It produces clear lines down to 0.06 mm. This makes it an excellent choice for mostly all engraving tasks. Its design is safe as well as trustworthy. It is excellent for small companies and also hobbyists.

It can etch different types of metal and also wood. It has the capacity to reduce 8 to tenmm plywood in one pass. It also has the ability to reduce natural leather as well as polymer.

It comes with a number of accessories. You can buy the bundle pack that includes the Air Assist Set and Honeycomb Working Panel. It sets you back $119 and also $269, specifically. You can additionally obtain a 1064nm laser head. This head decreases burn marks in plastic as well as is specifically useful for fragile fashion jewelry layouts. It also has an activity sensing unit and flame detection sensing unit.

It also features an emergency situation quit button. It can be regulated through Wi-fi as well as can import laser designs from totally free vector websites like Etsy. You can also manage it via the Makeblock XTool D1 app on Android as well as iphone.

It has a very good focus system. The laser crosshairs relocate as required as well as move to the framework of the artwork. This makes the inscribing extremely exact. It can also be made use of to create a thickening result, which can be helpful when etching big things.

The XTool D1 Pro has boosted attributes and also laser power. It uses a 20W laser module to produce a light beam that cuts objects in one pass. It can cut through 8mm black acrylic as well as 10mm basswood. It additionally has a greater rate. It can reach engraving precision of 0.0004 inches.


XTool D1 Focusing Procedure

The concentrating method on this maker is very creative. Alongside the laser module, there is a pivoting arm which you pull out when you want to focus the laser. It guarantees that you go down the head on the proper distance from the material. After that you tighten the thumb screw and also pivot the arm back up. Xtool M1 Specs


XTool D1 Special Features

Here are several of the leading Special Attributes of the XTool D1:

Wireless Connectivity

Maker can be connected using USB or a WiFi. And you can additionally control with a smartphone application on Android or iphone.

Trimming as well as Engraving Different Materials

Engrave: Wood, Bamboo, Cardboard, Plastic, Leather, PCB Board, Aluminum Oxide, Non-reflective, Electroplating Layer as well as Paint Surface Area Layer Steel, 304 Mirror Stainless-steel, Glass, Ceramics, Cotton Fabric, Slate.

The Makeblock XTool  D1 is likewise a very capable laser cutter.

Cut: Cardboard, Non-woven Material, Wood Board, Polymer, Some Thin Plastic Board, Sponge; cardboard …

You can reduce greater than 10mm thick stuff with this laser engraver. The device can cut wood, particularly Poplar plywood which is soft and it is the recommended wood for all laser cutters.

I would certainly avoid some plastics like PVC and also plastic considering that it releases hydrogen chloride gas while being reduced. This gas is toxic and also extremely corrosive (your machine will rust promptly).

We have actually evaluated the equipment with inscription as well as reducing various materials. You will find the results of our tests few chapters lower.

The Makeblock XTool D1 has steel rollers on all axis as opposed to the plastic ones we have seen on all various other devices. This need to allow for even more precision and much less mechanical wobble when engraving at high speeds. Xtool M1 Specs

Advanced Stepper Electric Motor Drivers 

The maker has a very advanced controller board. It has Trinamic stepper motor drivers which drive the electric motors with a pure sine wave. In this manner the motors are really exact and also silent. The drivers additionally support homing treatment without using limitation switches over as the chauffeurs measure existing through motors and spot the limit this way. This is why this equipment does not need physical restriction switches for homing.

The device has drivers for 3 axis– so you can connect in the roller system as a Z axis as opposed to having to separate among the axis when collaborating with a roller system.


XTool D1 Software

XTool D1 can be controlled via Wi-Fi or USB. The laser engraver device immediately quits if an unintended touch takes place. This is great for individuals that are concerned regarding security. The device is additionally suitable with Windows and also Mac OS systems.

The XTool D1 software application is very easy to use. As soon as you have the artwork prepared, you can make use of the app to establish the laser. You can likewise personalize the laser setups as well as develop custom-made artwork. The application likewise consists of a materials listing.

XTool D1 Pro is an upgrade to the previous XTool D1 laser cutter. It is a high-accuracy laser cutting equipment that can inscribe over 100 materials. The laser engraver tool is easy to use and also comes with a protective cover. The device has a service warranty of one year.


XTool D1 Engraving 

The XTool D1 is an extremely flexible etching device. It cam be made use of to inscribe on all types of products/.

Right here is a listing of products as well as functions that the XTool D1 flaunts:

  • Vector Image Engraving
  • Aluminium Engraving
  • Acrylic Engraving And Cutting
  • Plywood Cutting
  • Hardwood Cutting
  • Stainless Steel Engraving
  • Photo Engraving

FAQ

Is the XTool D1 worth it?

Makeblock XTool D1 is an effectively considered equipment. Exact, quick and solidly built. It comes at a costs cost, but it is worth it for someone that wants a good and nearly an industrial quality table leading laser engraver efficient in rapid cutting and also accurate engraving thanks to a powerful 10W laser module.

Is XTool better than Glowforge?

The very first laser inscription and also reducing equipment on our list is XTool D1 pro, the most effective option to Glowforge. It remains in starting point since it has gotten the Red Dot Style 2022 Honor. The impressive style as well as state-of-the-art modern technology established this maker besides various other equipments on the marketplace.

Can the XTool D1 cut wood?

XTool D1-5W can reduce a 4mm basswood board at the same time, as well as XTool D1-10W can cut a 6mm basswood board

How thick wood can XTool D1 cut?

XTool D1-5W can cut 6mm wood board at once, and also XTool D1-10W can reduce 10mm timber board at one time.

Can XTool D1 cut leather?

XTool can cut and engrave a massive variety of materials, from something as slim as tissue paper to something as thick as leather and also timber panels.

XTool D1 is a diode laser engraving as well as reducing equipment that works with a variety of materials, consisting of different types of wood. Its effective as well as highly focused laser can easily reduce and etched timber with best precision as well as accuracy.

Can the XTool D1 engrave alliminum?

You can additionally get the infrared laser component, which is especially made for steel and also plastic engraving. It can etch different metals, including aluminum and also rare-earth elements. It can likewise do colored engraving on different steels, including light weight aluminum.


Xtool M1 Specs                                                                                                                            Xtool M1 Specs  

You May Also Like