What is the Makeblock XTool D1? Xtool M1 Air Assist
XTool D1 is a laser cutter that has been developed by Makeblock. Xtool M1 Air Assist
The business was developed in 2012 by Jasen Wang, that studied aircraft design at Northwestern Polytechnic College. The firm is committed to creating innovative products to help individuals share themselves with development. Because its development, Makeblock has launched a number of academic robotics, along with a coding system for kids. It additionally introduced the MakeX Robot Competitors.
The XTool D1 is a mobile laser engraver that can reducing as well as inscribing a variety of products. Its laser can eliminate elaborate forms much faster than a scroll saw or jigsaw, and can be made use of for many different projects. Along with inscription, the D1 can additionally be used for various other projects, consisting of producing precious jewelry as well as light shades.
The D1 is a do it yourself set that can be put together in only regarding half an hour. Its unit is collapsible, enabling very easy transportability and reliable air flow. It is likewise constructed from flame-retardant polyester, making it risk-free from dirt bits. The enclosure also secures the working surface under the equipment.
The XTool D1 is geared up with a laser component that can engrave on steels and several other materials. It has actually an ultra-fine compressed laser place of 0.08 x 0.08 mm. This permits finer engraving and also higher accuracy.
The D1 additionally has a high resolution of 1000 DPI, that makes it feasible to inscribe on a wide variety of products. The D1 additionally has an integrated smartphone app that can be downloaded and install from the Android Store or the Apple Application Shop. The app can be used to import laser designs from cost-free vector sites, consisting of Etsy. The D1 can additionally be linked to a computer via USB or WiFi. It can additionally move information by means of Wi-Fi or a large ability TF card.
The D1 is capable of etching on Poplar plywood, which is one of one of the most commonly used timbers for laser cutters. The D1 can likewise cut on other woods, including tough maple, walnut, and also rosewood. Its laser head is flexible, allowing for a 50mm range. It can also refine products approximately 10mm thick, which means that it is able to engrave on a wide variety of products. The D1 is made for both residence and business use.
The XTool D1 can be found in two versions: the 20W version and also the 5W model. The 20W version has a larger laser head, as well as a smaller sized working area. The 5W version has a working area of 430 x 400 mm. It has a higher maximum speed of 400 mm/s, which makes it a quicker maker. Xtool M1 Air Assist
The D1 features a steel framework, which offers maximum security and also durability. It also has a concurrent belt to enhance activity accuracy. The belt’s moderate tension is needed for precision, specifically when relocating at broadband. The synchronous belt can additionally aid the device keep stable as well as lessen vibration. It can also eliminate the activity space, allowing for great vector graphics at broadband.
Order Your XTool Laser Products Here – Best Prices Guaranteed
XTool D1 Specification
| Parameter | Value |
|---|---|
|
Engraving Size
|
432 * 406 mm (17 * 16 inch)
|
|
Engraving Materials
|
Wood, Bamboo, Cardboard, Plastic, Leather, PCB Board, Aluminum Oxide, Non-reflective, Electroplating Layer and Paint Surface Layer Metal, 304 Mirror Stainless Steel, Glass, Ceramics, Cotton Cloth, Slate;
|
|
Laser Output Optical Power
|
10W
|
|
Laser Wavelength
|
450nm
|
|
Focusing Method
|
Fixed focus laser
|
|
Operating Software
|
Makeblock LaserBox Basic, LightBurn, Android and iOS
|
|
Input voltage
|
AC100-240V, 50/60Hz
|
|
Weight
|
5kg
|
|
Warranty
|
One Year
|
XTool D1 Laser Diode
XTool D1 Laser Diode is one of the most effective diode laser on the marketplace. It generates clear lines to 0.06 mm. This makes it an excellent choice for mostly all engraving tasks. Its design is risk-free and trusted. It is perfect for local business and also hobbyists.
It can etch various sorts of steel and also timber. It has the capability to reduce 8 to tenmm plywood in one pass. It likewise has the ability to reduce natural leather as well as acrylic.
It includes a number of accessories. You can get the package pack that consists of the Air Help Set and also Honeycomb Working Panel. It sets you back $119 as well as $269, respectively. You can likewise get a 1064nm laser head. This head minimizes melt marks in plastic as well as is especially useful for delicate precious jewelry layouts. It also has a movement sensing unit as well as flame discovery sensor.
It additionally includes an emergency situation quit button. It can be managed with Wi-fi as well as can import laser designs from totally free vector websites like Etsy. You can likewise regulate it using the Makeblock XTool D1 application on Android and iOS.
It has a very good emphasis mechanism. The laser crosshairs relocate as required as well as move to the frame of the artwork. This makes the inscribing extremely specific. It can likewise be made use of to create a thickening effect, which can be beneficial when etching big products.
The XTool D1 Pro has enhanced functions and also laser power. It utilizes a 20W laser component to create a light beam that cuts objects in one pass. It can cut through 8mm black acrylic and also 10mm basswood. It likewise has a greater speed. It can get to inscribing precision of 0.0004 inches.
XTool D1 Focusing Procedure
The focusing method on this equipment is really clever. Alongside the laser module, there is a rotating arm which you pull out when you want to focus the laser. It ensures that you go down the head on the correct range from the product. After that you tighten the thumb screw as well as pivot the arm back up. Xtool M1 Air Assist
XTool D1 Special Features
Below are some of the leading Special Features of the XTool D1:
Wireless Connection
Machine can be linked by means of USB or a WiFi. And you can likewise regulate with a smartphone app on Android or iOS.
Trimming and also Engraving Different Products
Engrave: Timber, Bamboo, Cardboard, Plastic, Natural Leather, PCB Board, Aluminum Oxide, Non-reflective, Electroplating Layer and Paint Surface Layer Steel, 304 Mirror Stainless Steel, Glass, Ceramics, Cotton Fabric, Slate.
The Makeblock XTool D1 is likewise an extremely capable laser cutter.
Cut: Cardboard, Non-woven Textile, Timber Board, Acrylic, Some Thin Plastic Board, Sponge; cardboard …
You can reduce greater than 10mm thick stuff with this laser engraver. The device can reduce timber, specifically Poplar plywood which is soft and it is the recommended timber for all laser cutters.
I would stay clear of some plastics like PVC as well as vinyl considering that it releases hydrogen chloride gas while being reduced. This gas is poisonous as well as really harsh (your machine will certainly rust swiftly).
We have checked the equipment with inscription as well as reducing various products. You will discover the outcomes of our tests few phases lower.
The Makeblock XTool D1 has steel rollers on all axis instead of the plastic ones we have seen on all other makers. This ought to permit more precision and also much less mechanical wobble when etching at high speeds. Xtool M1 Air Assist
Advanced Stepper Electric Motor Drivers
The device has a very innovative controller board. It has Trinamic stepper motor vehicle drivers which drive the electric motors with a pure sine wave. In this manner the motors are really precise as well as quiet. The vehicle drivers also support homing procedure without making use of limit switches over as the drivers gauge current with electric motors and spot the limit this way. This is why this device does not require physical restriction switches for homing.
The machine has chauffeurs for 3 axis– so you can connect in the roller system as a Z axis as opposed to needing to disconnect among the axis when dealing with a roller system.
XTool D1 Software
XTool D1 can be controlled via Wi-Fi or USB. The laser engraver device immediately stops if an unexpected touch occurs. This is wonderful for individuals that are worried about safety. The tool is also compatible with Windows and also Mac OS systems.
The XTool D1 software program is very easy to use. When you have the artwork prepared, you can use the application to establish the laser. You can likewise customize the laser setups as well as develop custom art work. The app likewise includes a materials listing.
XTool D1 Pro is an upgrade to the previous XTool D1 laser cutter. It is a high-accuracy laser cutting machine that can etch over 100 materials. The laser engraver tool is easy to use and comes with a safety cover. The device has a guarantee of one year.
XTool D1 Engraving
The XTool D1 is a really flexible etching device. It cam be used to etch on all kinds of products/.
Right here is a list of products and also features that the XTool D1 boasts:
- Vector Image Engraving
- Aluminium Engraving
- Acrylic Engraving And Cutting
- Plywood Cutting
- Hardwood Cutting
- Stainless Steel Engraving
- Photo Engraving
FAQ
Is the XTool D1 worth it?
Makeblock XTool D1 is an extremely well considered device. Exact, quick and sturdily built. It comes at a costs cost, however it is worth it for somebody that wants a great as well as practically an industrial grade table top laser engraver capable of fast cutting and also specific engraving thanks to a powerful 10W laser module.
Is XTool better than Glowforge?
The very first laser engraving as well as reducing maker on our checklist is XTool D1 pro, the very best alternative to Glowforge. It remains in starting point since it has received the Red Dot Design 2022 Honor. The exceptional style as well as advanced technology set this device apart from other equipments on the marketplace.
Can the XTool D1 cut wood?
XTool D1-5W can reduce a 4mm basswood board at the same time, and XTool D1-10W can reduce a 6mm basswood board
How thick wood can XTool D1 cut?
XTool D1-5W can reduce 6mm timber board at one time, as well as XTool D1-10W can cut 10mm wood board at once.
Can XTool D1 cut leather?
XTool can reduce as well as etch a huge variety of products, from something as slim as tissue paper to something as thick as leather and timber panels.
XTool D1 is a diode laser engraving and also reducing machine that works with a variety of materials, including different types of timber. Its effective and highly concentrated laser can easily cut and engraved timber with best precision as well as precision.
Can the XTool D1 engrave alliminum?
You can additionally get the infrared laser module, which is specifically produced metal as well as plastic inscription. It can inscribe numerous steels, including aluminum and also rare-earth elements. It can likewise do colored inscribing on numerous metals, including light weight aluminum.