What is the Makeblock XTool D1? Xtool Kc501 Key & Chip Programmer
XTool D1 is a laser cutter that has actually been produced by Makeblock. Xtool Kc501 Key & Chip Programmer
The company was established in 2012 by Jasen Wang, who researched airplane design at Northwestern Polytechnic College. The company is committed to developing cutting-edge products to help individuals share themselves with development. Because its development, Makeblock has launched several academic robotics, along with a coding system for kids. It additionally introduced the MakeX Robotic Competition.
The XTool D1 is a mobile laser engraver that is capable of cutting and also engraving a selection of materials. Its laser can remove detailed forms much faster than a scroll saw or jigsaw, and can be made use of for various tasks. Along with inscription, the D1 can likewise be used for various other projects, consisting of developing precious jewelry and also lamp tones.
The D1 is a DIY kit that can be assembled in only about half a hr. Its enclosure is collapsible, permitting simple portability and efficient air flow. It is likewise made of flame-retardant polyester, making it safe from dirt bits. The enclosure also protects the functioning surface under the equipment.
The XTool D1 is equipped with a laser module that is capable of engrave on steels and also lots of other products. It has an ultra-fine pressed laser spot of 0.08 x 0.08 mm. This permits finer engraving and higher accuracy.
The D1 additionally has a high resolution of 1000 DPI, that makes it feasible to inscribe on a wide variety of materials. The D1 also has a built-in smart device application that can be downloaded and install from the Android Shop or the Apple App Shop. The app can be utilized to import laser layouts from cost-free vector websites, including Etsy. The D1 can likewise be connected to a computer system through USB or WiFi. It can also transfer information via Wi-Fi or a large capability TF card.
The D1 is capable of inscribing on Poplar plywood, which is just one of one of the most commonly used woods for laser cutters. The D1 can likewise cut on other timbers, consisting of difficult maple, walnut, as well as rosewood. Its laser head is flexible, allowing for a 50mm array. It can additionally refine products as much as 10mm thick, which indicates that it has the ability to etch on a wide variety of materials. The D1 is made for both house and company usage.
The XTool D1 is available in two models: the 20W version as well as the 5W version. The 20W version has a bigger laser head, as well as a smaller sized working area. The 5W model has a working area of 430 x 400 mm. It has a greater maximum speed of 400 mm/s, that makes it a quicker machine. Xtool Kc501 Key & Chip Programmer
The D1 includes a steel framework, which supplies optimum stability as well as longevity. It also has a synchronous belt to enhance activity precision. The belt’s moderate stress is needed for precision, specifically when moving at high speeds. The synchronous belt can likewise aid the maker keep secure as well as reduce resonance. It can also get rid of the movement void, allowing for fine vector graphics at broadband.
Order Your XTool Laser Products Here – Best Prices Guaranteed
XTool D1 Specification
| Parameter | Value |
|---|---|
|
Engraving Size
|
432 * 406 mm (17 * 16 inch)
|
|
Engraving Materials
|
Wood, Bamboo, Cardboard, Plastic, Leather, PCB Board, Aluminum Oxide, Non-reflective, Electroplating Layer and Paint Surface Layer Metal, 304 Mirror Stainless Steel, Glass, Ceramics, Cotton Cloth, Slate;
|
|
Laser Output Optical Power
|
10W
|
|
Laser Wavelength
|
450nm
|
|
Focusing Method
|
Fixed focus laser
|
|
Operating Software
|
Makeblock LaserBox Basic, LightBurn, Android and iOS
|
|
Input voltage
|
AC100-240V, 50/60Hz
|
|
Weight
|
5kg
|
|
Warranty
|
One Year
|
XTool D1 Laser Diode
XTool D1 Laser Diode is the most effective diode laser on the marketplace. It creates clear lines down to 0.06 mm. This makes it an exceptional option for mostly all inscribing jobs. Its layout is risk-free as well as trustworthy. It is ideal for local business as well as hobbyists.
It can inscribe different kinds of steel and timber. It has the capacity to reduce 8 to tenmm plywood in one pass. It additionally has the ability to cut leather and also acrylic.
It features a variety of devices. You can acquire the bundle pack that consists of the Air Help Establish and also Honeycomb Working Panel. It sets you back $119 and $269, specifically. You can additionally obtain a 1064nm laser head. This head reduces shed marks in plastic as well as is particularly beneficial for delicate jewelry layouts. It also has a motion sensing unit as well as flame detection sensor.
It also includes an emergency quit button. It can be regulated through Wi-fi and can import laser styles from free vector sites like Etsy. You can additionally manage it using the Makeblock XTool D1 app on Android as well as iOS.
It has a very good focus mechanism. The laser crosshairs move as needed as well as move to the structure of the art work. This makes the etching extremely specific. It can likewise be made use of to produce a thickening impact, which can be valuable when inscribing large products.
The XTool D1 Pro has actually improved features and also laser power. It utilizes a 20W laser module to create a beam that reduces things in one pass. It can puncture 8mm black acrylic as well as 10mm basswood. It additionally has a greater speed. It can reach inscribing precision of 0.0004 inches.
XTool D1 Focusing Procedure
The focusing approach on this maker is very smart. Next to the laser component, there is a rotating arm which you take out when you want to focus the laser. It assures that you drop the head on the correct distance from the material. Then you tighten the thumb screw and rotate the arm back up. Xtool Kc501 Key & Chip Programmer
XTool D1 Special Features
Here are a few of the top Unique Functions of the XTool D1:
Wireless Connectivity
Maker can be connected through USB or a WiFi. As well as you can likewise control with a smart device app on Android or iphone.
Trimming and also Inscription Different Products
Engrave: Timber, Bamboo, Cardboard, Plastic, Leather, PCB Board, Light Weight Aluminum Oxide, Non-reflective, Electroplating Layer and also Paint Surface Area Layer Metal, 304 Mirror Stainless Steel, Glass, Ceramics, Cotton Cloth, Slate.
The Makeblock XTool D1 is likewise a very qualified laser cutter.
Cut: Cardboard, Non-woven Material, Wood Board, Polymer, Some Thin Plastic Board, Sponge; cardboard …
You can cut greater than 10mm thick things with this laser engraver. The machine can reduce wood, especially Poplar plywood which is soft and also it is the recommended timber for all laser cutters.
I would certainly prevent some plastics like PVC and vinyl since it launches hydrogen chloride gas while being cut. This gas is harmful and really destructive (your maker will corrosion quickly).
We have checked the equipment with inscription and reducing different products. You will locate the outcomes of our tests few phases lower.
The Makeblock XTool D1 has steel rollers on all axis instead of the plastic ones we have actually seen on all other makers. This should allow for even more accuracy and much less mechanical wobble when etching at broadband. Xtool Kc501 Key & Chip Programmer
Advanced Stepper Electric Motor Drivers
The maker has a really innovative controller board. It has Trinamic stepper electric motor drivers which drive the electric motors with a pure sine wave. This way the electric motors are very exact and also silent. The chauffeurs also support homing treatment without utilizing limitation switches as the chauffeurs determine present via electric motors and also find the limit by doing this. This is why this equipment does not require physical restriction changes for homing.
The equipment has chauffeurs for 3 axis– so you can connect in the roller system as a Z axis rather than having to detach among the axis when dealing with a roller system.
XTool D1 Software
XTool D1 can be controlled using Wi-Fi or USB. The laser engraver tool automatically quits if an accidental touch happens. This is wonderful for individuals who are concerned concerning safety. The tool is also suitable with Windows and Mac OS systems.
The XTool D1 software program is really easy to use. As soon as you have actually the artwork prepared, you can use the app to establish the laser. You can also tailor the laser setups and produce custom artwork. The app also includes a materials listing.
XTool D1 Pro is an upgrade to the previous XTool D1 laser cutter. It is a high-accuracy laser cutting device that can engrave over 100 materials. The laser engraver tool is easy to use and features a protective cover. The maker has a service warranty of one year.
XTool D1 Engraving
The XTool D1 is an extremely flexible inscribing machine. It cam be made use of to engrave on all kinds of products/.
Below is a list of materials and features that the XTool D1 boasts:
- Vector Image Engraving
- Aluminium Engraving
- Acrylic Engraving And Cutting
- Plywood Cutting
- Hardwood Cutting
- Stainless Steel Engraving
- Photo Engraving
FAQ
Is the XTool D1 worth it?
Makeblock XTool D1 is an effectively considered maker. Specific, quick and also well built. It comes at a costs cost, yet it deserves it for somebody that desires an excellent as well as virtually a commercial grade table top laser engraver with the ability of rapid cutting and precise engraving thanks to an effective 10W laser component.
Is XTool better than Glowforge?
The initial laser inscription and also reducing machine on our checklist is XTool D1 pro, the best option to Glowforge. It is in first place since it has obtained the Red Dot Layout 2022 Award. The superior layout as well as advanced innovation set this equipment besides various other makers on the marketplace.
Can the XTool D1 cut wood?
XTool D1-5W can reduce a 4mm basswood board at once, and also XTool D1-10W can cut a 6mm basswood board
How thick wood can XTool D1 cut?
XTool D1-5W can cut 6mm timber board at once, and also XTool D1-10W can cut 10mm wood board at one time.
Can XTool D1 cut leather?
XTool can reduce and also inscribe a substantial variety of materials, from something as slim as cells paper to something as thick as leather and also timber panels.
XTool D1 is a diode laser engraving as well as cutting equipment that is compatible with a variety of materials, including different sorts of wood. Its powerful and also highly focused laser can easily reduce as well as etched timber with best accuracy and precision.
Can the XTool D1 engrave alliminum?
You can likewise get the infrared laser component, which is specifically made for steel and plastic inscription. It can inscribe different steels, including aluminum and also precious metals. It can also do tinted etching on different steels, consisting of aluminum.
Xtool Kc501 Key & Chip Programmer Xtool Kc501 Key & Chip Programmer