What is the Makeblock XTool D1? Xtool Kc100
XTool D1 is a laser cutter that has actually been developed by Makeblock. Xtool Kc100
The company was established in 2012 by Jasen Wang, that researched aircraft style at Northwestern Polytechnic College. The firm is devoted to creating cutting-edge products to assist people reveal themselves through creation. Since its production, Makeblock has actually launched numerous instructional robotics, as well as a coding system for kids. It additionally released the MakeX Robot Competitors.
The XTool D1 is a mobile laser engraver that is capable of cutting as well as inscribing a variety of materials. Its laser can remove elaborate forms much faster than a scroll saw or jigsaw, and can be made use of for several tasks. In addition to inscription, the D1 can additionally be utilized for other jobs, including producing precious jewelry and light shades.
The D1 is a DIY set that can be put together in just about half a hr. Its unit is foldable, permitting easy portability as well as effective air flow. It is also made from flame-retardant polyester, making it risk-free from dirt particles. The room also secures the working surface under the equipment.
The XTool D1 is furnished with a laser module that can engrave on steels as well as several other products. It has an ultra-fine compressed laser area of 0.08 x 0.08 mm. This permits finer engraving and greater accuracy.
The D1 also has a high resolution of 1000 DPI, which makes it possible to inscribe on a large range of products. The D1 additionally has a built-in smart device application that can be downloaded from the Android Shop or the Apple Application Store. The application can be made use of to import laser designs from free vector sites, consisting of Etsy. The D1 can additionally be connected to a computer through USB or WiFi. It can also move information by means of Wi-Fi or a huge ability TF card.
The D1 can engraving on Poplar plywood, which is one of one of the most commonly used woods for laser cutters. The D1 can additionally cut on various other timbers, including difficult maple, walnut, and also rosewood. Its laser head is adjustable, permitting a 50mm range. It can additionally process materials up to 10mm thick, which implies that it has the ability to engrave on a wide variety of materials. The D1 is made for both residence and company usage.
The XTool D1 comes in 2 models: the 20W variation and the 5W model. The 20W variation has a larger laser head, and also a smaller sized working location. The 5W model has a workspace of 430 x 400 mm. It has a greater maximum speed of 400 mm/s, which makes it a quicker maker. Xtool Kc100
The D1 includes a steel framework, which supplies maximum stability and also toughness. It likewise has a simultaneous belt to boost motion precision. The belt’s moderate tension is needed for precision, especially when relocating at broadband. The synchronous belt can additionally help the equipment remain stable as well as lessen resonance. It can likewise eliminate the movement void, allowing for great vector graphics at high speeds.
Order Your XTool Laser Products Here – Best Prices Guaranteed
XTool D1 Specification
| Parameter | Value |
|---|---|
|
Engraving Size
|
432 * 406 mm (17 * 16 inch)
|
|
Engraving Materials
|
Wood, Bamboo, Cardboard, Plastic, Leather, PCB Board, Aluminum Oxide, Non-reflective, Electroplating Layer and Paint Surface Layer Metal, 304 Mirror Stainless Steel, Glass, Ceramics, Cotton Cloth, Slate;
|
|
Laser Output Optical Power
|
10W
|
|
Laser Wavelength
|
450nm
|
|
Focusing Method
|
Fixed focus laser
|
|
Operating Software
|
Makeblock LaserBox Basic, LightBurn, Android and iOS
|
|
Input voltage
|
AC100-240V, 50/60Hz
|
|
Weight
|
5kg
|
|
Warranty
|
One Year
|
XTool D1 Laser Diode
XTool D1 Laser Diode is the most powerful diode laser on the marketplace. It produces clear lines down to 0.06 mm. This makes it an outstanding choice for mostly all inscribing jobs. Its style is safe as well as trusted. It is ideal for small businesses as well as enthusiasts.
It can inscribe various kinds of steel and also wood. It has the capacity to cut 8 to tenmm plywood in one pass. It also has the capacity to reduce leather and also polymer.
It features a number of devices. You can buy the bundle pack that includes the Air Help Set and also Honeycomb Working Panel. It sets you back $119 and also $269, respectively. You can additionally get a 1064nm laser head. This head decreases melt marks in plastic and also is specifically beneficial for fragile precious jewelry designs. It additionally has a movement sensing unit and also fire discovery sensing unit.
It also includes an emergency situation quit switch. It can be controlled through WiFi and can import laser styles from complimentary vector websites like Etsy. You can likewise control it through the Makeblock XTool D1 application on Android and iOS.
It has a great focus system. The laser crosshairs relocate as required as well as transfer to the structure of the art work. This makes the etching very precise. It can likewise be made use of to develop a thickening result, which can be beneficial when inscribing large things.
The XTool D1 Pro has boosted features as well as laser power. It uses a 20W laser component to develop a light beam that reduces things in one pass. It can puncture 8mm black acrylic as well as 10mm basswood. It also has a greater speed. It can reach inscribing precision of 0.0004 inches.
XTool D1 Focusing Procedure
The concentrating technique on this device is extremely brilliant. Alongside the laser module, there is a swivelling arm which you take out when you wish to focus the laser. It assures that you go down the directly the proper distance from the product. After that you tighten the thumb screw and also swivel the arm back up. Xtool Kc100
XTool D1 Special Features
Right here are a few of the leading Special Features of the XTool D1:
Wireless Connectivity
Equipment can be connected by means of USB or a Wi-fi. As well as you can also control with a mobile phone app on Android or iOS.
Cutting and Inscription Different Products
Engrave: Timber, Bamboo, Cardboard, Plastic, Natural Leather, PCB Board, Light Weight Aluminum Oxide, Non-reflective, Electroplating Layer and also Paint Surface Layer Steel, 304 Mirror Stainless Steel, Glass, Ceramics, Cotton Towel, Slate.
The Makeblock XTool D1 is also a very capable laser cutter.
Cut: Cardboard, Non-woven Fabric, Wood Board, Acrylic, Some Thin Plastic Board, Sponge; cardboard …
You can cut greater than 10mm thick stuff with this laser engraver. The equipment can reduce wood, especially Poplar plywood which is soft and also it is the favored wood for all laser cutters.
I would certainly avoid some plastics like PVC as well as plastic since it releases hydrogen chloride gas while being cut. This gas is hazardous and also very destructive (your equipment will rust swiftly).
We have tested the equipment with engraving and also reducing various materials. You will locate the results of our tests few chapters lower.
The Makeblock XTool D1 has steel rollers on all axis instead of the plastic ones we have actually seen on all other devices. This ought to enable more accuracy as well as much less mechanical wobble when engraving at broadband. Xtool Kc100
Advanced Stepper Motor Drivers
The device has a very advanced controller board. It has Trinamic stepper electric motor vehicle drivers which drive the electric motors with a pure sine wave. By doing this the electric motors are extremely specific and silent. The chauffeurs likewise sustain homing treatment without utilizing limit changes as the vehicle drivers determine current through motors as well as discover the limit by doing this. This is why this maker does not need physical limit switches for homing.
The equipment has chauffeurs for 3 axis– so you can connect in the roller system as a Z axis as opposed to needing to detach one of the axis when collaborating with a roller system.
XTool D1 Software
XTool D1 can be managed through Wi-Fi or USB. The laser engraver tool automatically quits if an accidental touch takes place. This is fantastic for people who are concerned concerning safety. The tool is also suitable with Windows and also Mac OS systems.
The XTool D1 software is extremely easy to use. Once you have the art work prepared, you can make use of the application to establish the laser. You can additionally personalize the laser setups as well as develop customized artwork. The application also consists of a materials list.
XTool D1 Pro is an upgrade to the previous XTool D1 laser cutter. It is a high-accuracy laser reducing machine that can inscribe over 100 materials. The laser engraver device is easy to use as well as comes with a protective cover. The device has a service warranty of year.
XTool D1 Engraving
The XTool D1 is an extremely functional inscribing equipment. It cam be made use of to inscribe on all kinds of products/.
Right here is a checklist of materials and attributes that the XTool D1 flaunts:
- Vector Image Engraving
- Aluminium Engraving
- Acrylic Engraving And Cutting
- Plywood Cutting
- Hardwood Cutting
- Stainless Steel Engraving
- Photo Engraving
FAQ
Is the XTool D1 worth it?
Makeblock XTool D1 is an extremely well thought out maker. Accurate, fast as well as sturdily constructed. It comes at a costs rate, however it is worth it for a person that desires an excellent as well as nearly an industrial quality table leading laser engraver capable of quick cutting as well as accurate inscription thanks to a powerful 10W laser module.
Is XTool better than Glowforge?
The first laser inscription and also cutting device on our checklist is XTool D1 pro, the very best option to Glowforge. It remains in first place since it has actually gotten the Red Dot Layout 2022 Award. The impressive style and cutting edge technology set this maker besides other makers on the market.
Can the XTool D1 cut wood?
XTool D1-5W can reduce a 4mm basswood board simultaneously, as well as XTool D1-10W can reduce a 6mm basswood board
How thick wood can XTool D1 cut?
XTool D1-5W can cut 6mm timber board at once, and also XTool D1-10W can cut 10mm wood board at once.
Can XTool D1 cut leather?
XTool can cut and engrave a significant variety of products, from something as slim as tissue paper to something as thick as leather as well as wood panels.
XTool D1 is a diode laser engraving and also reducing maker that works with a large range of products, consisting of different kinds of wood. Its effective as well as highly concentrated laser can quickly reduce and etched timber with supreme accuracy and also accuracy.
Can the XTool D1 engrave alliminum?
You can also get the infrared laser component, which is specifically created steel and plastic inscription. It can etch numerous metals, including aluminum and rare-earth elements. It can likewise do colored inscribing on numerous steels, consisting of light weight aluminum.