What is the Makeblock XTool D1? Xtool K001
XTool D1 is a laser cutter that has been developed by Makeblock. Xtool K001
The company was established in 2012 by Jasen Wang, that researched aircraft design at Northwestern Polytechnic College. The firm is committed to creating cutting-edge products to help people share themselves via creation. Given that its development, Makeblock has released a number of instructional robots, as well as a coding platform for children. It additionally launched the MakeX Robotic Competition.
The XTool D1 is a mobile laser engraver that can reducing and inscribing a range of materials. Its laser can cut out complex forms much faster than a scroll saw or jigsaw, as well as can be used for various projects. In addition to inscription, the D1 can additionally be made use of for other tasks, consisting of creating precious jewelry and also light tones.
The D1 is a DIY package that can be set up in only concerning half an hour. Its room is foldable, enabling very easy portability and also efficient ventilation. It is additionally made from flame-retardant polyester, making it safe from dirt fragments. The unit also shields the working surface under the device.
The XTool D1 is equipped with a laser module that is capable of engrave on steels and lots of other products. It has actually an ultra-fine compressed laser spot of 0.08 x 0.08 mm. This enables finer engraving and greater accuracy.
The D1 additionally has a high resolution of 1000 DPI, which makes it feasible to engrave on a wide range of products. The D1 additionally has an integrated smart device app that can be downloaded from the Android Store or the Apple Application Shop. The application can be used to import laser styles from cost-free vector websites, consisting of Etsy. The D1 can also be linked to a computer through USB or WiFi. It can additionally transfer information using Wi-Fi or a big capability TF card.
The D1 is capable of inscribing on Poplar plywood, which is one of the most generally utilized woods for laser cutters. The D1 can likewise cut on other timbers, consisting of difficult maple, walnut, as well as rosewood. Its laser head is flexible, permitting a 50mm variety. It can also refine products approximately 10mm thick, which means that it has the ability to etch on a variety of products. The D1 is developed for both home and also service use.
The XTool D1 can be found in two designs: the 20W variation and the 5W version. The 20W variation has a larger laser head, and also a smaller sized working area. The 5W version has a workplace of 430 x 400 mm. It has a greater maximum speed of 400 mm/s, that makes it a faster maker. Xtool K001
The D1 includes a steel framework, which offers optimum security and also resilience. It likewise has a concurrent belt to enhance movement accuracy. The belt’s moderate stress is required for accuracy, especially when relocating at broadband. The simultaneous belt can also aid the machine keep steady as well as lessen resonance. It can likewise get rid of the activity space, allowing for fine vector graphics at high speeds.
Order Your XTool Laser Products Here – Best Prices Guaranteed
XTool D1 Specification
| Parameter | Value |
|---|---|
|
Engraving Size
|
432 * 406 mm (17 * 16 inch)
|
|
Engraving Materials
|
Wood, Bamboo, Cardboard, Plastic, Leather, PCB Board, Aluminum Oxide, Non-reflective, Electroplating Layer and Paint Surface Layer Metal, 304 Mirror Stainless Steel, Glass, Ceramics, Cotton Cloth, Slate;
|
|
Laser Output Optical Power
|
10W
|
|
Laser Wavelength
|
450nm
|
|
Focusing Method
|
Fixed focus laser
|
|
Operating Software
|
Makeblock LaserBox Basic, LightBurn, Android and iOS
|
|
Input voltage
|
AC100-240V, 50/60Hz
|
|
Weight
|
5kg
|
|
Warranty
|
One Year
|
XTool D1 Laser Diode
XTool D1 Laser Diode is one of the most powerful diode laser on the marketplace. It generates clear lines down to 0.06 mm. This makes it an excellent selection for nearly all engraving tasks. Its layout is safe as well as dependable. It is optimal for small businesses as well as hobbyists.
It can engrave various kinds of metal and timber. It has the ability to reduce eight to tenmm plywood in one pass. It additionally has the capacity to reduce leather as well as polymer.
It comes with a number of devices. You can get the package pack that consists of the Air Help Establish and Honeycomb Working Panel. It sets you back $119 and $269, respectively. You can likewise get a 1064nm laser head. This head decreases shed marks in plastic and also is especially valuable for fragile precious jewelry styles. It likewise has an activity sensing unit and also fire discovery sensing unit.
It likewise features an emergency situation quit switch. It can be regulated through Wi-fi and also can import laser designs from cost-free vector sites like Etsy. You can also regulate it via the Makeblock XTool D1 application on Android and iphone.
It has a great focus device. The laser crosshairs move as required and relocate to the frame of the art work. This makes the etching very precise. It can additionally be utilized to create a thickening impact, which can be valuable when inscribing huge items.
The XTool D1 Pro has boosted functions as well as laser power. It utilizes a 20W laser component to produce a beam of light that reduces objects in one pass. It can puncture 8mm black acrylic and 10mm basswood. It also has a higher rate. It can get to inscribing precision of 0.0004 inches.
XTool D1 Focusing Procedure
The concentrating method on this machine is very brilliant. Beside the laser component, there is a rotating arm which you pull out when you intend to focus the laser. It assures that you drop the head on the right range from the product. After that you tighten up the thumb screw as well as swivel the arm back up. Xtool K001
XTool D1 Special Features
Below are some of the top Special Attributes of the XTool D1:
Wireless Connectivity
Machine can be attached by means of USB or a Wi-fi. And also you can also control with a mobile phone app on Android or iOS.
Trimming and also Engraving Different Materials
Engrave: Timber, Bamboo, Cardboard, Plastic, Natural Leather, PCB Board, Aluminum Oxide, Non-reflective, Electroplating Layer and also Paint Surface Layer Steel, 304 Mirror Stainless-steel, Glass, Ceramics, Cotton Towel, Slate.
The Makeblock XTool D1 is additionally an extremely capable laser cutter.
Cut: Cardboard, Non-woven Textile, Wood Board, Acrylic, Some Thin Plastic Board, Sponge; cardboard …
You can cut more than 10mm thick things with this laser engraver. The device can reduce timber, especially Poplar plywood which is soft as well as it is the preferred timber for all laser cutters.
I would stay clear of some plastics like PVC and vinyl since it releases hydrogen chloride gas while being cut. This gas is poisonous as well as really destructive (your machine will certainly rust swiftly).
We have actually checked the device with engraving as well as cutting different products. You will certainly find the results of our tests couple of phases lower.
The Makeblock XTool D1 has steel rollers on all axis instead of the plastic ones we have seen on all various other makers. This should allow for more accuracy and also less mechanical wobble when inscribing at high speeds. Xtool K001
Advanced Stepper Electric Motor Drivers
The device has a very advanced controller board. It has Trinamic stepper electric motor vehicle drivers which drive the motors with a pure sine wave. By doing this the motors are very specific and also silent. The drivers also support homing procedure without using limitation switches over as the drivers gauge current with electric motors as well as detect the limit this way. This is why this machine does not need physical limitation switches for homing.
The device has vehicle drivers for 3 axis– so you can plug in the roller system as a Z axis instead of needing to separate one of the axis when collaborating with a roller system.
XTool D1 Software
XTool D1 can be controlled using Wi-Fi or USB. The laser engraver tool immediately stops if an unintentional touch takes place. This is excellent for people who are worried about safety. The tool is additionally suitable with Windows as well as Mac OS systems.
The XTool D1 software is very easy to use. Once you have the artwork prepared, you can use the app to set up the laser. You can also personalize the laser settings and also develop custom artwork. The app additionally consists of a materials checklist.
XTool D1 Pro is an upgrade to the previous XTool D1 laser cutter. It is a high-accuracy laser reducing equipment that can inscribe over 100 materials. The laser engraver device is easy to use as well as features a safety cover. The machine has a warranty of year.
XTool D1 Engraving
The XTool D1 is an extremely versatile inscribing device. It cam be used to inscribe on all sorts of products/.
Below is a checklist of products as well as features that the XTool D1 boasts:
- Vector Image Engraving
- Aluminium Engraving
- Acrylic Engraving And Cutting
- Plywood Cutting
- Hardwood Cutting
- Stainless Steel Engraving
- Photo Engraving
FAQ
Is the XTool D1 worth it?
Makeblock XTool D1 is a quite possibly considered maker. Specific, rapid and solidly developed. It comes at a premium rate, yet it is worth it for a person that wants a great and almost an industrial grade table top laser engraver with the ability of quick cutting and specific engraving thanks to a powerful 10W laser component.
Is XTool better than Glowforge?
The very first laser engraving and cutting machine on our checklist is XTool D1 pro, the most effective choice to Glowforge. It is in starting point because it has actually obtained the Red Dot Layout 2022 Award. The exceptional design as well as cutting edge technology established this maker aside from various other makers on the marketplace.
Can the XTool D1 cut wood?
XTool D1-5W can reduce a 4mm basswood board at the same time, and XTool D1-10W can reduce a 6mm basswood board
How thick wood can XTool D1 cut?
XTool D1-5W can cut 6mm wood board at once, and also XTool D1-10W can cut 10mm timber board at one time.
Can XTool D1 cut leather?
XTool can cut and also engrave a huge selection of products, from something as slim as tissue paper to something as thick as natural leather and also timber panels.
XTool D1 is a diode laser engraving as well as reducing machine that works with a large range of products, consisting of various sorts of timber. Its powerful and extremely concentrated laser can conveniently reduce and etched wood with ultimate precision and accuracy.
Can the XTool D1 engrave alliminum?
You can additionally obtain the infrared laser component, which is especially created metal and plastic engraving. It can etch different steels, including aluminum and also rare-earth elements. It can also do tinted engraving on numerous metals, consisting of light weight aluminum.