What is the Makeblock XTool D1? Xtool Ez400 Vs X100 Pad 2
XTool D1 is a laser cutter that has been produced by Makeblock. Xtool Ez400 Vs X100 Pad 2
The firm was established in 2012 by Jasen Wang, that studied airplane design at Northwestern Polytechnic University. The company is committed to producing innovative products to aid people share themselves with development. Given that its creation, Makeblock has actually launched a number of educational robots, in addition to a coding system for kids. It also released the MakeX Robotic Competitors.
The XTool D1 is a mobile laser engraver that can reducing as well as engraving a range of products. Its laser can cut out complex forms much faster than a scroll saw or jigsaw, and also can be made use of for several projects. Along with inscription, the D1 can also be made use of for various other tasks, consisting of developing jewelry as well as lamp tones.
The D1 is a do it yourself kit that can be set up in only concerning half an hour. Its unit is foldable, permitting very easy portability and effective air flow. It is likewise made of flame-retardant polyester, making it secure from dust bits. The unit likewise safeguards the functioning surface under the device.
The XTool D1 is geared up with a laser component that can engrave on steels and lots of other products. It has actually an ultra-fine compressed laser area of 0.08 x 0.08 mm. This enables finer inscription and also higher precision.
The D1 also has a high resolution of 1000 DPI, which makes it possible to inscribe on a large range of products. The D1 also has a built-in mobile phone application that can be downloaded from the Android Shop or the Apple Application Shop. The app can be used to import laser designs from complimentary vector websites, consisting of Etsy. The D1 can likewise be connected to a computer via USB or WiFi. It can additionally transfer data using Wi-Fi or a big capability TF card.
The D1 is capable of engraving on Poplar plywood, which is just one of the most frequently made use of timbers for laser cutters. The D1 can likewise cut on various other timbers, including tough maple, walnut, and rosewood. Its laser head is adjustable, enabling a 50mm array. It can likewise process products as much as 10mm thick, which implies that it has the ability to engrave on a wide variety of materials. The D1 is made for both house as well as business usage.
The XTool D1 comes in 2 models: the 20W variation as well as the 5W design. The 20W version has a bigger laser head, and a smaller working location. The 5W model has a workplace of 430 x 400 mm. It has a greater maximum speed of 400 mm/s, that makes it a faster equipment. Xtool Ez400 Vs X100 Pad 2
The D1 features a steel framework, which provides maximum security as well as longevity. It also has a simultaneous belt to enhance activity precision. The belt’s moderate tension is needed for precision, specifically when moving at high speeds. The simultaneous belt can also aid the device stay secure and reduce vibration. It can additionally get rid of the activity space, allowing for fine vector graphics at high speeds.
Order Your XTool Laser Products Here – Best Prices Guaranteed
XTool D1 Specification
| Parameter | Value |
|---|---|
|
Engraving Size
|
432 * 406 mm (17 * 16 inch)
|
|
Engraving Materials
|
Wood, Bamboo, Cardboard, Plastic, Leather, PCB Board, Aluminum Oxide, Non-reflective, Electroplating Layer and Paint Surface Layer Metal, 304 Mirror Stainless Steel, Glass, Ceramics, Cotton Cloth, Slate;
|
|
Laser Output Optical Power
|
10W
|
|
Laser Wavelength
|
450nm
|
|
Focusing Method
|
Fixed focus laser
|
|
Operating Software
|
Makeblock LaserBox Basic, LightBurn, Android and iOS
|
|
Input voltage
|
AC100-240V, 50/60Hz
|
|
Weight
|
5kg
|
|
Warranty
|
One Year
|
XTool D1 Laser Diode
XTool D1 Laser Diode is one of the most powerful diode laser on the market. It generates clear lines to 0.06 mm. This makes it an excellent choice for mostly all inscribing jobs. Its style is safe and also dependable. It is optimal for small businesses as well as enthusiasts.
It can inscribe various kinds of steel and wood. It has the ability to reduce 8 to tenmm plywood in one pass. It likewise has the capability to reduce leather and acrylic.
It includes a variety of accessories. You can get the package pack that consists of the Air Assist Establish and also Honeycomb Working Panel. It costs $119 as well as $269, specifically. You can likewise get a 1064nm laser head. This head lowers shed marks in plastic and is especially valuable for fragile fashion jewelry styles. It likewise has a movement sensing unit as well as flame discovery sensing unit.
It additionally features an emergency situation stop switch. It can be controlled with Wi-fi and also can import laser designs from complimentary vector websites like Etsy. You can also manage it via the Makeblock XTool D1 application on Android as well as iOS.
It has a very good focus device. The laser crosshairs move as required and move to the structure of the artwork. This makes the inscribing very precise. It can additionally be made use of to create a thickening result, which can be useful when etching big things.
The XTool D1 Pro has actually boosted attributes as well as laser power. It uses a 20W laser module to develop a beam of light that cuts things in one pass. It can cut through 8mm black acrylic and also 10mm basswood. It also has a higher speed. It can get to inscribing precision of 0.0004 inches.
XTool D1 Focusing Procedure
The concentrating method on this equipment is very smart. Alongside the laser module, there is a pivoting arm which you pull out when you intend to focus the laser. It guarantees that you go down the head on the proper range from the product. Then you tighten up the thumb screw and rotate the arm back up. Xtool Ez400 Vs X100 Pad 2
XTool D1 Special Features
Right here are some of the top Unique Features of the XTool D1:
Wireless Connection
Device can be attached via USB or a Wi-fi. As well as you can additionally control with a smart device app on Android or iOS.
Trimming and Engraving Different Products
Engrave: Wood, Bamboo, Cardboard, Plastic, Leather, PCB Board, Aluminum Oxide, Non-reflective, Electroplating Layer as well as Paint Surface Area Layer Metal, 304 Mirror Stainless Steel, Glass, Ceramics, Cotton Fabric, Slate.
The Makeblock XTool D1 is likewise a really capable laser cutter.
Cut: Cardboard, Non-woven Textile, Timber Board, Polymer, Some Thin Plastic Board, Sponge; cardboard …
You can reduce more than 10mm thick stuff with this laser engraver. The equipment can cut wood, specifically Poplar plywood which is soft and also it is the favored timber for all laser cutters.
I would certainly prevent some plastics like PVC as well as vinyl since it releases hydrogen chloride gas while being cut. This gas is poisonous as well as really destructive (your machine will certainly rust quickly).
We have tested the equipment with engraving and reducing various products. You will certainly discover the outcomes of our examinations few chapters lower.
The Makeblock XTool D1 has steel rollers on all axis rather than the plastic ones we have seen on all various other machines. This must allow for even more precision as well as much less mechanical wobble when etching at broadband. Xtool Ez400 Vs X100 Pad 2
Advanced Stepper Motor Drivers
The machine has an extremely advanced controller board. It has Trinamic stepper electric motor drivers which drive the motors with a pure sine wave. By doing this the motors are very specific as well as quiet. The vehicle drivers also sustain homing procedure without utilizing limitation switches as the vehicle drivers measure current through motors and find the limit by doing this. This is why this maker does not need physical restriction changes for homing.
The machine has motorists for 3 axis– so you can connect in the roller system as a Z axis as opposed to needing to disconnect one of the axis when dealing with a roller system.
XTool D1 Software
XTool D1 can be controlled using Wi-Fi or USB. The laser engraver device automatically quits if an accidental touch takes place. This is fantastic for people that are worried regarding security. The tool is additionally suitable with Windows and Mac OS systems.
The XTool D1 software is very easy to use. As soon as you have actually the art work prepared, you can use the application to set up the laser. You can also customize the laser setups and also create custom-made art work. The application likewise includes a products checklist.
XTool D1 Pro is an upgrade to the previous XTool D1 laser cutter. It is a high-accuracy laser reducing equipment that can engrave over 100 products. The laser engraver device is easy to use and also comes with a safety cover. The machine has a service warranty of one year.
XTool D1 Engraving
The XTool D1 is a really flexible engraving maker. It cam be used to inscribe on all types of products/.
Here is a checklist of products and features that the XTool D1 boasts:
- Vector Image Engraving
- Aluminium Engraving
- Acrylic Engraving And Cutting
- Plywood Cutting
- Hardwood Cutting
- Stainless Steel Engraving
- Photo Engraving
FAQ
Is the XTool D1 worth it?
Makeblock XTool D1 is a very well considered device. Specific, fast and well constructed. It comes at a costs cost, however it is worth it for somebody that wants a good as well as almost an industrial grade table top laser engraver with the ability of rapid cutting as well as specific inscription thanks to an effective 10W laser module.
Is XTool better than Glowforge?
The very first laser engraving as well as reducing device on our checklist is XTool D1 pro, the very best option to Glowforge. It is in starting point because it has actually received the Red Dot Design 2022 Honor. The exceptional design as well as advanced technology established this device besides other machines on the marketplace.
Can the XTool D1 cut wood?
XTool D1-5W can reduce a 4mm basswood board at the same time, and XTool D1-10W can reduce a 6mm basswood board
How thick wood can XTool D1 cut?
XTool D1-5W can cut 6mm timber board at once, and also XTool D1-10W can reduce 10mm wood board at one time.
Can XTool D1 cut leather?
XTool can cut and also etch a substantial selection of products, from something as slim as cells paper to something as thick as leather and timber panels.
XTool D1 is a diode laser engraving as well as cutting device that works with a large range of materials, including different kinds of wood. Its effective as well as very focused laser can quickly reduce as well as engraved wood with ultimate accuracy and accuracy.
Can the XTool D1 engrave alliminum?
You can also obtain the infrared laser component, which is particularly created metal and also plastic engraving. It can etch different metals, consisting of light weight aluminum and precious metals. It can also do tinted etching on various steels, consisting of aluminum.