What is the Makeblock XTool D1? Xtool D1 Laser Specs
XTool D1 is a laser cutter that has actually been created by Makeblock. Xtool D1 Laser Specs
The company was established in 2012 by Jasen Wang, that studied aircraft style at Northwestern Polytechnic University. The company is dedicated to creating cutting-edge products to aid people reveal themselves via creation. Considering that its production, Makeblock has released numerous academic robots, along with a coding system for youngsters. It additionally introduced the MakeX Robot Competitors.
The XTool D1 is a portable laser engraver that is capable of reducing and also inscribing a selection of materials. Its laser can cut out complex shapes much faster than a scroll saw or jigsaw, and can be used for many different tasks. In addition to engraving, the D1 can likewise be made use of for various other projects, consisting of creating precious jewelry and also lamp tones.
The D1 is a DIY package that can be constructed in only concerning half an hour. Its unit is collapsible, enabling simple mobility as well as effective ventilation. It is likewise made from flame-retardant polyester, making it safe from dust particles. The enclosure also shields the functioning surface area under the device.
The XTool D1 is outfitted with a laser module that is capable of engrave on metals as well as numerous various other materials. It has an ultra-fine pressed laser area of 0.08 x 0.08 mm. This enables finer inscription and higher accuracy.
The D1 also has a high resolution of 1000 DPI, that makes it possible to etch on a variety of materials. The D1 also has an integrated smart device app that can be downloaded from the Android Shop or the Apple Application Shop. The app can be utilized to import laser styles from totally free vector websites, including Etsy. The D1 can additionally be attached to a computer by means of USB or WiFi. It can also transfer information using Wi-Fi or a large capability TF card.
The D1 is capable of engraving on Poplar plywood, which is just one of the most commonly used woods for laser cutters. The D1 can additionally reduce on various other woods, consisting of tough maple, walnut, and rosewood. Its laser head is adjustable, enabling a 50mm variety. It can also process products approximately 10mm thick, which implies that it has the ability to engrave on a wide array of products. The D1 is developed for both house as well as service use.
The XTool D1 is available in two versions: the 20W variation and the 5W model. The 20W version has a larger laser head, and also a smaller working area. The 5W model has a workspace of 430 x 400 mm. It has a greater maximum speed of 400 mm/s, that makes it a faster equipment. Xtool D1 Laser Specs
The D1 features a steel framework, which offers optimum stability and also resilience. It also has a synchronous belt to improve motion precision. The belt’s modest stress is needed for precision, specifically when moving at broadband. The synchronous belt can also help the device stay steady and reduce resonance. It can also remove the motion void, permitting great vector graphics at high speeds.
Order Your XTool Laser Products Here – Best Prices Guaranteed
XTool D1 Specification
| Parameter | Value |
|---|---|
|
Engraving Size
|
432 * 406 mm (17 * 16 inch)
|
|
Engraving Materials
|
Wood, Bamboo, Cardboard, Plastic, Leather, PCB Board, Aluminum Oxide, Non-reflective, Electroplating Layer and Paint Surface Layer Metal, 304 Mirror Stainless Steel, Glass, Ceramics, Cotton Cloth, Slate;
|
|
Laser Output Optical Power
|
10W
|
|
Laser Wavelength
|
450nm
|
|
Focusing Method
|
Fixed focus laser
|
|
Operating Software
|
Makeblock LaserBox Basic, LightBurn, Android and iOS
|
|
Input voltage
|
AC100-240V, 50/60Hz
|
|
Weight
|
5kg
|
|
Warranty
|
One Year
|
XTool D1 Laser Diode
XTool D1 Laser Diode is one of the most powerful diode laser on the market. It creates clear lines to 0.06 mm. This makes it an outstanding option for almost all etching jobs. Its design is risk-free as well as trustworthy. It is optimal for local business and hobbyists.
It can etch various types of metal and timber. It has the ability to reduce eight to tenmm plywood in one pass. It additionally has the capability to cut leather and polymer.
It includes a variety of accessories. You can get the package pack that consists of the Air Help Establish and also Honeycomb Working Panel. It costs $119 and $269, respectively. You can likewise obtain a 1064nm laser head. This head lowers burn marks in plastic and also is specifically helpful for fragile precious jewelry designs. It additionally has a motion sensor and flame discovery sensor.
It likewise includes an emergency stop button. It can be managed via Wi-fi and can import laser styles from complimentary vector sites like Etsy. You can likewise control it by means of the Makeblock XTool D1 app on Android and also iOS.
It has a great emphasis system. The laser crosshairs move as required as well as relocate to the structure of the artwork. This makes the engraving very precise. It can likewise be utilized to develop a thickening effect, which can be beneficial when inscribing big things.
The XTool D1 Pro has actually enhanced functions as well as laser power. It uses a 20W laser component to produce a beam that reduces things in one pass. It can cut through 8mm black acrylic and 10mm basswood. It additionally has a greater rate. It can reach etching precision of 0.0004 inches.
XTool D1 Focusing Procedure
The focusing approach on this equipment is really smart. Alongside the laser component, there is a swivelling arm which you take out when you intend to concentrate the laser. It guarantees that you drop the directly the correct range from the product. After that you tighten the thumb screw as well as swivel the arm back up. Xtool D1 Laser Specs
XTool D1 Special Features
Below are several of the leading Special Features of the XTool D1:
Wireless Connectivity
Maker can be connected through USB or a Wi-fi. And you can likewise control with a smart device app on Android or iOS.
Trimming as well as Engraving Different Materials
Engrave: Wood, Bamboo, Cardboard, Plastic, Leather, PCB Board, Aluminum Oxide, Non-reflective, Electroplating Layer as well as Paint Surface Layer Steel, 304 Mirror Stainless-steel, Glass, Ceramics, Cotton Fabric, Slate.
The Makeblock XTool D1 is also an extremely qualified laser cutter.
Cut: Cardboard, Non-woven Fabric, Timber Board, Polymer, Some Thin Plastic Board, Sponge; cardboard …
You can cut more than 10mm thick things with this laser engraver. The maker can cut timber, particularly Poplar plywood which is soft and it is the recommended timber for all laser cutters.
I would certainly avoid some plastics like PVC and also plastic since it releases hydrogen chloride gas while being reduced. This gas is poisonous and also extremely destructive (your equipment will certainly rust promptly).
We have actually examined the machine with engraving and reducing various materials. You will certainly discover the results of our examinations few phases lower.
The Makeblock XTool D1 has steel rollers on all axis instead of the plastic ones we have seen on all other equipments. This should allow for more precision and less mechanical wobble when engraving at high speeds. Xtool D1 Laser Specs
Advanced Stepper Motor Drivers
The maker has a really innovative controller board. It has Trinamic stepper electric motor motorists which drive the electric motors with a pure sine wave. By doing this the electric motors are really precise and also quiet. The motorists additionally sustain homing treatment without using limit changes as the chauffeurs gauge existing through electric motors and discover the limit by doing this. This is why this machine does not require physical restriction changes for homing.
The maker has motorists for 3 axis– so you can connect in the roller system as a Z axis rather than having to disconnect among the axis when dealing with a roller system.
XTool D1 Software
XTool D1 can be managed via Wi-Fi or USB. The laser engraver tool immediately quits if an accidental touch takes place. This is great for people that are worried concerning security. The device is also compatible with Windows and also Mac OS systems.
The XTool D1 software program is really easy to use. When you have actually the artwork prepared, you can utilize the app to establish the laser. You can additionally personalize the laser setups and also produce personalized artwork. The application likewise includes a materials checklist.
XTool D1 Pro is an upgrade to the previous XTool D1 laser cutter. It is a high-accuracy laser cutting device that can engrave over 100 products. The laser engraver device is easy to use as well as includes a protective cover. The device has a service warranty of twelve month.
XTool D1 Engraving
The XTool D1 is an extremely versatile etching equipment. It cam be utilized to engrave on all types of materials/.
Right here is a checklist of products and features that the XTool D1 flaunts:
- Vector Image Engraving
- Aluminium Engraving
- Acrylic Engraving And Cutting
- Plywood Cutting
- Hardwood Cutting
- Stainless Steel Engraving
- Photo Engraving
FAQ
Is the XTool D1 worth it?
Makeblock XTool D1 is an extremely well considered maker. Specific, rapid and solidly developed. It comes at a premium rate, yet it is worth it for someone that desires a great and virtually a commercial quality table leading laser engraver capable of quick cutting as well as accurate inscription thanks to an effective 10W laser component.
Is XTool better than Glowforge?
The first laser inscription as well as cutting device on our checklist is XTool D1 pro, the best choice to Glowforge. It is in starting point due to the fact that it has actually gotten the Red Dot Style 2022 Award. The impressive layout as well as modern innovation set this equipment apart from other makers on the marketplace.
Can the XTool D1 cut wood?
XTool D1-5W can reduce a 4mm basswood board simultaneously, and XTool D1-10W can cut a 6mm basswood board
How thick wood can XTool D1 cut?
XTool D1-5W can reduce 6mm wood board at one time, as well as XTool D1-10W can reduce 10mm wood board at once.
Can XTool D1 cut leather?
XTool can cut and inscribe a significant variety of materials, from something as slim as cells paper to something as thick as natural leather as well as timber panels.
XTool D1 is a diode laser inscription and reducing machine that is compatible with a variety of products, consisting of different kinds of wood. Its effective as well as highly concentrated laser can conveniently cut and etched timber with utmost accuracy and also precision.
Can the XTool D1 engrave alliminum?
You can additionally obtain the infrared laser component, which is especially produced metal and plastic engraving. It can inscribe numerous metals, including aluminum and also rare-earth elements. It can additionally do colored etching on various metals, including light weight aluminum.