What is the Makeblock XTool D1? Xtool D1 Engraving Glass
XTool D1 is a laser cutter that has actually been created by Makeblock. Xtool D1 Engraving Glass
The firm was developed in 2012 by Jasen Wang, that examined aircraft layout at Northwestern Polytechnic College. The company is dedicated to developing innovative products to assist individuals reveal themselves through development. Since its development, Makeblock has actually released several academic robotics, as well as a coding platform for children. It also introduced the MakeX Robotic Competition.
The XTool D1 is a portable laser engraver that is capable of cutting as well as inscribing a selection of materials. Its laser can cut out complex forms much faster than a scroll saw or jigsaw, and also can be utilized for many different jobs. In addition to engraving, the D1 can likewise be utilized for other jobs, including developing jewelry and also lamp tones.
The D1 is a do it yourself kit that can be assembled in only about half a hr. Its unit is collapsible, enabling simple transportability and reliable air flow. It is additionally constructed from flame-retardant polyester, making it secure from dirt fragments. The enclosure additionally protects the working surface area under the device.
The XTool D1 is equipped with a laser component that can engrave on steels as well as lots of other materials. It has actually an ultra-fine compressed laser place of 0.08 x 0.08 mm. This enables finer engraving as well as greater accuracy.
The D1 additionally has a high resolution of 1000 DPI, that makes it feasible to etch on a variety of materials. The D1 likewise has an integrated smartphone application that can be downloaded and install from the Android Shop or the Apple Application Store. The app can be utilized to import laser styles from complimentary vector sites, consisting of Etsy. The D1 can also be connected to a computer by means of USB or WiFi. It can likewise move information by means of Wi-Fi or a huge capacity TF card.
The D1 can inscribing on Poplar plywood, which is one of one of the most generally used timbers for laser cutters. The D1 can also cut on other woods, including difficult maple, walnut, and also rosewood. Its laser head is flexible, allowing for a 50mm variety. It can additionally process products as much as 10mm thick, which suggests that it is able to etch on a wide variety of materials. The D1 is created for both residence as well as company use.
The XTool D1 is available in two models: the 20W variation and also the 5W model. The 20W version has a larger laser head, and a smaller sized working location. The 5W design has a working area of 430 x 400 mm. It has a greater maximum speed of 400 mm/s, which makes it a quicker maker. Xtool D1 Engraving Glass
The D1 includes a steel structure, which provides maximum security and resilience. It additionally has a concurrent belt to enhance movement precision. The belt’s modest tension is required for precision, particularly when moving at broadband. The synchronous belt can likewise aid the equipment remain secure and reduce resonance. It can additionally remove the motion void, permitting great vector graphics at high speeds.
Order Your XTool Laser Products Here – Best Prices Guaranteed
XTool D1 Specification
| Parameter | Value |
|---|---|
|
Engraving Size
|
432 * 406 mm (17 * 16 inch)
|
|
Engraving Materials
|
Wood, Bamboo, Cardboard, Plastic, Leather, PCB Board, Aluminum Oxide, Non-reflective, Electroplating Layer and Paint Surface Layer Metal, 304 Mirror Stainless Steel, Glass, Ceramics, Cotton Cloth, Slate;
|
|
Laser Output Optical Power
|
10W
|
|
Laser Wavelength
|
450nm
|
|
Focusing Method
|
Fixed focus laser
|
|
Operating Software
|
Makeblock LaserBox Basic, LightBurn, Android and iOS
|
|
Input voltage
|
AC100-240V, 50/60Hz
|
|
Weight
|
5kg
|
|
Warranty
|
One Year
|
XTool D1 Laser Diode
XTool D1 Laser Diode is one of the most effective diode laser on the marketplace. It generates clear lines to 0.06 mm. This makes it an outstanding selection for nearly all etching tasks. Its design is risk-free and also trustworthy. It is optimal for small businesses as well as enthusiasts.
It can etch various sorts of steel as well as timber. It has the capacity to cut eight to tenmm plywood in one pass. It additionally has the ability to cut natural leather and also polymer.
It features a variety of devices. You can buy the bundle pack that consists of the Air Help Set as well as Honeycomb Working Panel. It sets you back $119 as well as $269, respectively. You can additionally obtain a 1064nm laser head. This head decreases burn marks in plastic and also is especially valuable for delicate precious jewelry styles. It also has an activity sensor as well as fire discovery sensing unit.
It also includes an emergency stop button. It can be managed via Wi-fi and also can import laser styles from complimentary vector websites like Etsy. You can additionally manage it by means of the Makeblock XTool D1 app on Android and also iOS.
It has a very good focus mechanism. The laser crosshairs move as needed and relocate to the frame of the artwork. This makes the engraving extremely exact. It can also be used to create a thickening effect, which can be valuable when inscribing huge products.
The XTool D1 Pro has actually boosted attributes and laser power. It makes use of a 20W laser component to produce a beam of light that reduces items in one pass. It can puncture 8mm black acrylic and 10mm basswood. It additionally has a greater speed. It can reach etching precision of 0.0004 inches.
XTool D1 Focusing Procedure
The concentrating technique on this equipment is very smart. Beside the laser module, there is a pivoting arm which you take out when you wish to concentrate the laser. It ensures that you go down the head on the right range from the material. Then you tighten up the thumb screw as well as swivel the arm back up. Xtool D1 Engraving Glass
XTool D1 Special Features
Below are some of the top Special Attributes of the XTool D1:
Wireless Connection
Maker can be attached through USB or a WiFi. And also you can additionally regulate with a smart device application on Android or iphone.
Trimming and Inscription Different Materials
Engrave: Wood, Bamboo, Cardboard, Plastic, Natural Leather, PCB Board, Light Weight Aluminum Oxide, Non-reflective, Electroplating Layer and also Paint Surface Area Layer Steel, 304 Mirror Stainless Steel, Glass, Ceramics, Cotton Towel, Slate.
The Makeblock XTool D1 is also a very capable laser cutter.
Cut: Cardboard, Non-woven Material, Timber Board, Acrylic, Some Thin Plastic Board, Sponge; cardboard …
You can reduce more than 10mm thick stuff with this laser engraver. The device can reduce timber, especially Poplar plywood which is soft and also it is the preferred timber for all laser cutters.
I would certainly stay clear of some plastics like PVC and also vinyl considering that it releases hydrogen chloride gas while being cut. This gas is hazardous and also very corrosive (your maker will rust quickly).
We have tested the maker with engraving and cutting different materials. You will discover the results of our examinations few phases lower.
The Makeblock XTool D1 has steel rollers on all axis as opposed to the plastic ones we have actually seen on all other makers. This must permit even more accuracy and much less mechanical wobble when etching at broadband. Xtool D1 Engraving Glass
Advanced Stepper Electric Motor Drivers
The maker has a really innovative controller board. It has Trinamic stepper electric motor vehicle drivers which drive the electric motors with a pure sine wave. By doing this the electric motors are very specific and silent. The motorists likewise support homing procedure without utilizing limit switches over as the drivers gauge present via electric motors as well as identify the limit in this manner. This is why this equipment does not require physical restriction changes for homing.
The device has vehicle drivers for 3 axis– so you can plug in the roller system as a Z axis as opposed to needing to disconnect among the axis when collaborating with a roller system.
XTool D1 Software
XTool D1 can be managed using Wi-Fi or USB. The laser engraver device automatically quits if an unexpected touch takes place. This is excellent for individuals that are worried about safety. The tool is also suitable with Windows as well as Mac OS systems.
The XTool D1 software application is really easy to use. When you have actually the artwork prepared, you can make use of the application to establish the laser. You can additionally tailor the laser setups as well as produce custom-made artwork. The application additionally includes a materials listing.
XTool D1 Pro is an upgrade to the previous XTool D1 laser cutter. It is a high-accuracy laser reducing maker that can etch over 100 products. The laser engraver device is easy to use as well as features a safety cover. The device has a service warranty of one year.
XTool D1 Engraving
The XTool D1 is a really functional etching device. It cam be utilized to engrave on all types of materials/.
Right here is a list of materials and also features that the XTool D1 boasts:
- Vector Image Engraving
- Aluminium Engraving
- Acrylic Engraving And Cutting
- Plywood Cutting
- Hardwood Cutting
- Stainless Steel Engraving
- Photo Engraving
FAQ
Is the XTool D1 worth it?
Makeblock XTool D1 is an effectively thought out maker. Precise, rapid as well as sturdily developed. It comes with a premium rate, but it deserves it for someone that desires a great and also almost a commercial quality table leading laser engraver capable of rapid cutting as well as exact engraving thanks to a powerful 10W laser component.
Is XTool better than Glowforge?
The first laser inscription as well as reducing device on our checklist is XTool D1 pro, the very best choice to Glowforge. It is in first place due to the fact that it has actually obtained the Red Dot Style 2022 Honor. The outstanding style as well as advanced modern technology set this maker aside from various other makers on the market.
Can the XTool D1 cut wood?
XTool D1-5W can reduce a 4mm basswood board simultaneously, as well as XTool D1-10W can reduce a 6mm basswood board
How thick wood can XTool D1 cut?
XTool D1-5W can reduce 6mm wood board at one time, and XTool D1-10W can reduce 10mm timber board at one time.
Can XTool D1 cut leather?
XTool can cut as well as engrave a substantial range of products, from something as slim as tissue paper to something as thick as leather and timber panels.
XTool D1 is a diode laser inscription and also reducing device that is compatible with a variety of products, including various types of wood. Its powerful and highly concentrated laser can quickly reduce and also inscribed wood with ultimate precision as well as precision.
Can the XTool D1 engrave alliminum?
You can likewise obtain the infrared laser module, which is particularly produced steel as well as plastic engraving. It can inscribe different steels, including light weight aluminum and precious metals. It can likewise do colored inscribing on numerous steels, including aluminum.