What is the Makeblock XTool D1? Xtool D1 Air Assist Nozzle
XTool D1 is a laser cutter that has actually been created by Makeblock. Xtool D1 Air Assist Nozzle
The business was developed in 2012 by Jasen Wang, who studied airplane design at Northwestern Polytechnic College. The company is dedicated to developing cutting-edge products to help individuals express themselves via creation. Because its creation, Makeblock has released several instructional robotics, along with a coding system for kids. It also released the MakeX Robotic Competition.
The XTool D1 is a portable laser engraver that is capable of reducing and also inscribing a variety of materials. Its laser can eliminate elaborate shapes much faster than a scroll saw or jigsaw, as well as can be utilized for various projects. Along with inscription, the D1 can additionally be utilized for various other tasks, consisting of developing jewelry and light tones.
The D1 is a do it yourself package that can be set up in only concerning half a hr. Its enclosure is foldable, allowing for simple mobility as well as effective air flow. It is additionally made of flame-retardant polyester, making it risk-free from dirt bits. The room also shields the functioning surface under the maker.
The XTool D1 is equipped with a laser component that is capable of engrave on metals as well as numerous various other materials. It has actually an ultra-fine compressed laser area of 0.08 x 0.08 mm. This enables finer engraving and higher accuracy.
The D1 also has a high resolution of 1000 DPI, that makes it possible to inscribe on a variety of products. The D1 additionally has a built-in mobile phone app that can be downloaded and install from the Android Shop or the Apple App Shop. The application can be utilized to import laser styles from cost-free vector websites, including Etsy. The D1 can likewise be linked to a computer system via USB or WiFi. It can additionally move data through Wi-Fi or a big capacity TF card.
The D1 can inscribing on Poplar plywood, which is one of one of the most commonly used woods for laser cutters. The D1 can also reduce on various other woods, consisting of hard maple, walnut, and rosewood. Its laser head is adjustable, allowing for a 50mm range. It can also refine products as much as 10mm thick, which means that it has the ability to etch on a variety of materials. The D1 is developed for both residence and also company use.
The XTool D1 can be found in 2 designs: the 20W variation as well as the 5W design. The 20W version has a larger laser head, as well as a smaller sized working area. The 5W model has a workspace of 430 x 400 mm. It has a higher maximum speed of 400 mm/s, that makes it a much faster equipment. Xtool D1 Air Assist Nozzle
The D1 features a steel framework, which provides maximum stability and resilience. It likewise has a simultaneous belt to boost movement precision. The belt’s modest tension is needed for precision, specifically when relocating at broadband. The synchronous belt can likewise help the equipment stay secure as well as reduce vibration. It can also eliminate the movement gap, allowing for fine vector graphics at high speeds.
Order Your XTool Laser Products Here – Best Prices Guaranteed
XTool D1 Specification
| Parameter | Value |
|---|---|
|
Engraving Size
|
432 * 406 mm (17 * 16 inch)
|
|
Engraving Materials
|
Wood, Bamboo, Cardboard, Plastic, Leather, PCB Board, Aluminum Oxide, Non-reflective, Electroplating Layer and Paint Surface Layer Metal, 304 Mirror Stainless Steel, Glass, Ceramics, Cotton Cloth, Slate;
|
|
Laser Output Optical Power
|
10W
|
|
Laser Wavelength
|
450nm
|
|
Focusing Method
|
Fixed focus laser
|
|
Operating Software
|
Makeblock LaserBox Basic, LightBurn, Android and iOS
|
|
Input voltage
|
AC100-240V, 50/60Hz
|
|
Weight
|
5kg
|
|
Warranty
|
One Year
|
XTool D1 Laser Diode
XTool D1 Laser Diode is the most powerful diode laser on the marketplace. It produces clear lines to 0.06 mm. This makes it a superb selection for almost all engraving tasks. Its design is safe and trusted. It is excellent for local business as well as enthusiasts.
It can engrave different types of metal as well as timber. It has the ability to cut 8 to tenmm plywood in one pass. It additionally has the ability to reduce natural leather as well as acrylic.
It features a variety of devices. You can get the package pack that consists of the Air Help Set and also Honeycomb Working Panel. It sets you back $119 as well as $269, specifically. You can likewise get a 1064nm laser head. This head lowers burn marks in plastic as well as is especially valuable for fragile precious jewelry styles. It additionally has a motion sensing unit as well as flame discovery sensing unit.
It also features an emergency situation stop switch. It can be managed via Wi-fi and can import laser layouts from free vector websites like Etsy. You can also control it via the Makeblock XTool D1 app on Android as well as iphone.
It has a great emphasis device. The laser crosshairs relocate as needed and also transfer to the frame of the art work. This makes the etching very accurate. It can also be used to create a thickening effect, which can be helpful when inscribing huge products.
The XTool D1 Pro has improved functions as well as laser power. It utilizes a 20W laser component to develop a light beam that reduces objects in one pass. It can puncture 8mm black acrylic and also 10mm basswood. It additionally has a higher speed. It can reach engraving accuracy of 0.0004 inches.
XTool D1 Focusing Procedure
The concentrating approach on this equipment is extremely clever. Alongside the laser module, there is a swivelling arm which you pull out when you wish to concentrate the laser. It assures that you go down the directly the correct distance from the material. Then you tighten up the thumb screw as well as swivel the arm back up. Xtool D1 Air Assist Nozzle
XTool D1 Special Features
Right here are some of the leading Special Functions of the XTool D1:
Wireless Connectivity
Machine can be linked through USB or a Wi-fi. As well as you can also regulate with a smartphone app on Android or iOS.
Trimming and also Engraving Different Materials
Engrave: Wood, Bamboo, Cardboard, Plastic, Leather, PCB Board, Aluminum Oxide, Non-reflective, Electroplating Layer and Paint Surface Layer Steel, 304 Mirror Stainless Steel, Glass, Ceramics, Cotton Towel, Slate.
The Makeblock XTool D1 is additionally a really capable laser cutter.
Cut: Cardboard, Non-woven Textile, Timber Board, Acrylic, Some Thin Plastic Board, Sponge; cardboard …
You can cut greater than 10mm thick stuff with this laser engraver. The device can reduce wood, especially Poplar plywood which is soft as well as it is the favored wood for all laser cutters.
I would prevent some plastics like PVC and plastic since it releases hydrogen chloride gas while being reduced. This gas is toxic and extremely harsh (your equipment will corrosion swiftly).
We have actually examined the maker with engraving as well as reducing different products. You will find the outcomes of our examinations few phases lower.
The Makeblock XTool D1 has steel rollers on all axis as opposed to the plastic ones we have seen on all various other equipments. This must permit even more precision as well as much less mechanical wobble when etching at high speeds. Xtool D1 Air Assist Nozzle
Advanced Stepper Motor Drivers
The equipment has an extremely advanced controller board. It has Trinamic stepper motor drivers which drive the electric motors with a pure sine wave. In this manner the electric motors are really exact and also silent. The vehicle drivers likewise support homing treatment without utilizing limit switches as the chauffeurs gauge current via motors and also find the limit in this manner. This is why this maker does not require physical limit switches over for homing.
The machine has chauffeurs for 3 axis– so you can connect in the roller system as a Z axis rather than needing to separate one of the axis when collaborating with a roller system.
XTool D1 Software
XTool D1 can be managed through Wi-Fi or USB. The laser engraver tool instantly quits if an unintended touch happens. This is terrific for people that are concerned about safety and security. The tool is also suitable with Windows as well as Mac OS systems.
The XTool D1 software program is very easy to use. When you have the artwork prepared, you can use the application to establish the laser. You can additionally personalize the laser setups as well as produce personalized artwork. The app likewise consists of a products list.
XTool D1 Pro is an upgrade to the previous XTool D1 laser cutter. It is a high-accuracy laser cutting maker that can etch over 100 materials. The laser engraver tool is easy to use as well as includes a protective cover. The equipment has a warranty of one year.
XTool D1 Engraving
The XTool D1 is a very versatile inscribing equipment. It cam be made use of to engrave on all kinds of products/.
Below is a list of materials and also features that the XTool D1 boasts:
- Vector Image Engraving
- Aluminium Engraving
- Acrylic Engraving And Cutting
- Plywood Cutting
- Hardwood Cutting
- Stainless Steel Engraving
- Photo Engraving
FAQ
Is the XTool D1 worth it?
Makeblock XTool D1 is a very well considered device. Exact, fast and sturdily developed. It comes with a costs cost, yet it deserves it for someone that wants a great and virtually an industrial grade table leading laser engraver efficient in quick cutting as well as precise inscription thanks to a powerful 10W laser module.
Is XTool better than Glowforge?
The first laser inscription as well as cutting maker on our listing is XTool D1 pro, the best alternative to Glowforge. It is in top place due to the fact that it has actually gotten the Red Dot Layout 2022 Honor. The impressive style and modern technology established this maker aside from other makers on the marketplace.
Can the XTool D1 cut wood?
XTool D1-5W can reduce a 4mm basswood board at the same time, as well as XTool D1-10W can cut a 6mm basswood board
How thick wood can XTool D1 cut?
XTool D1-5W can reduce 6mm timber board at one time, and also XTool D1-10W can cut 10mm wood board at once.
Can XTool D1 cut leather?
XTool can reduce and also etch a significant variety of materials, from something as slim as cells paper to something as thick as natural leather as well as wood panels.
XTool D1 is a diode laser engraving and cutting device that works with a wide range of products, consisting of various kinds of timber. Its effective and also highly concentrated laser can quickly reduce as well as engraved timber with utmost accuracy and precision.
Can the XTool D1 engrave alliminum?
You can additionally obtain the infrared laser component, which is particularly produced metal as well as plastic inscription. It can etch different steels, consisting of light weight aluminum and also rare-earth elements. It can also do tinted inscribing on numerous steels, consisting of light weight aluminum.