What is the Makeblock XTool D1? Xtool 1
XTool D1 is a laser cutter that has actually been produced by Makeblock. Xtool 1
The company was developed in 2012 by Jasen Wang, who examined airplane layout at Northwestern Polytechnic College. The company is devoted to creating cutting-edge products to assist individuals express themselves through production. Given that its production, Makeblock has launched several academic robots, as well as a coding system for youngsters. It additionally released the MakeX Robot Competition.
The XTool D1 is a portable laser engraver that can reducing as well as engraving a variety of products. Its laser can eliminate elaborate shapes much faster than a scroll saw or jigsaw, as well as can be made use of for several tasks. In addition to engraving, the D1 can likewise be made use of for various other jobs, consisting of developing precious jewelry and light shades.
The D1 is a DIY set that can be put together in just concerning half an hour. Its enclosure is foldable, enabling easy mobility as well as efficient air flow. It is likewise made from flame-retardant polyester, making it secure from dust bits. The unit likewise protects the functioning surface under the maker.
The XTool D1 is furnished with a laser component that is capable of engrave on steels and several various other products. It has actually an ultra-fine pressed laser spot of 0.08 x 0.08 mm. This permits finer inscription as well as greater accuracy.
The D1 likewise has a high resolution of 1000 DPI, that makes it feasible to engrave on a wide range of materials. The D1 also has an integrated mobile phone app that can be downloaded and install from the Android Shop or the Apple App Shop. The application can be used to import laser layouts from cost-free vector sites, consisting of Etsy. The D1 can likewise be linked to a computer via USB or WiFi. It can additionally move information through Wi-Fi or a large capacity TF card.
The D1 can engraving on Poplar plywood, which is just one of one of the most typically utilized woods for laser cutters. The D1 can also cut on various other timbers, including hard maple, walnut, as well as rosewood. Its laser head is adjustable, allowing for a 50mm range. It can also refine products as much as 10mm thick, which implies that it has the ability to inscribe on a wide variety of products. The D1 is created for both residence as well as business use.
The XTool D1 can be found in 2 designs: the 20W version and the 5W design. The 20W version has a bigger laser head, and also a smaller sized working area. The 5W design has a workplace of 430 x 400 mm. It has a greater maximum speed of 400 mm/s, which makes it a much faster device. Xtool 1
The D1 includes a steel framework, which offers optimum security as well as toughness. It likewise has a simultaneous belt to improve movement accuracy. The belt’s moderate tension is needed for precision, specifically when moving at high speeds. The concurrent belt can likewise assist the device stay stable as well as lessen resonance. It can additionally remove the motion space, permitting great vector graphics at broadband.
Order Your XTool Laser Products Here – Best Prices Guaranteed
XTool D1 Specification
| Parameter | Value |
|---|---|
|
Engraving Size
|
432 * 406 mm (17 * 16 inch)
|
|
Engraving Materials
|
Wood, Bamboo, Cardboard, Plastic, Leather, PCB Board, Aluminum Oxide, Non-reflective, Electroplating Layer and Paint Surface Layer Metal, 304 Mirror Stainless Steel, Glass, Ceramics, Cotton Cloth, Slate;
|
|
Laser Output Optical Power
|
10W
|
|
Laser Wavelength
|
450nm
|
|
Focusing Method
|
Fixed focus laser
|
|
Operating Software
|
Makeblock LaserBox Basic, LightBurn, Android and iOS
|
|
Input voltage
|
AC100-240V, 50/60Hz
|
|
Weight
|
5kg
|
|
Warranty
|
One Year
|
XTool D1 Laser Diode
XTool D1 Laser Diode is the most powerful diode laser on the marketplace. It generates clear lines down to 0.06 mm. This makes it an excellent choice for nearly all engraving tasks. Its layout is secure as well as reliable. It is excellent for local business and hobbyists.
It can inscribe various kinds of steel and timber. It has the ability to cut 8 to tenmm plywood in one pass. It additionally has the capacity to cut leather and acrylic.
It features a number of devices. You can get the package pack that includes the Air Help Set and also Honeycomb Working Panel. It costs $119 and $269, respectively. You can additionally get a 1064nm laser head. This head lowers burn marks in plastic as well as is particularly helpful for fragile fashion jewelry styles. It also has a movement sensor and also flame discovery sensing unit.
It likewise features an emergency stop button. It can be regulated via WiFi as well as can import laser layouts from complimentary vector sites like Etsy. You can also control it by means of the Makeblock XTool D1 app on Android as well as iOS.
It has a great emphasis device. The laser crosshairs relocate as needed and transfer to the structure of the art work. This makes the engraving really exact. It can likewise be used to produce a thickening effect, which can be helpful when engraving large items.
The XTool D1 Pro has improved functions and laser power. It makes use of a 20W laser module to develop a light beam that cuts objects in one pass. It can cut through 8mm black acrylic as well as 10mm basswood. It also has a greater speed. It can reach etching precision of 0.0004 inches.
XTool D1 Focusing Procedure
The focusing method on this equipment is extremely creative. Beside the laser component, there is a pivoting arm which you take out when you want to concentrate the laser. It assures that you go down the directly the proper distance from the product. Then you tighten up the thumb screw and pivot the arm back up. Xtool 1
XTool D1 Special Features
Below are several of the top Unique Functions of the XTool D1:
Wireless Connectivity
Maker can be connected using USB or a WiFi. And also you can additionally regulate with a smartphone app on Android or iOS.
Trimming and also Inscription Different Products
Engrave: Timber, Bamboo, Cardboard, Plastic, Natural Leather, PCB Board, Aluminum Oxide, Non-reflective, Electroplating Layer and Paint Surface Area Layer Steel, 304 Mirror Stainless Steel, Glass, Ceramics, Cotton Cloth, Slate.
The Makeblock XTool D1 is likewise a very qualified laser cutter.
Cut: Cardboard, Non-woven Fabric, Timber Board, Polymer, Some Thin Plastic Board, Sponge; cardboard …
You can cut greater than 10mm thick things with this laser engraver. The device can reduce timber, especially Poplar plywood which is soft and it is the favored wood for all laser cutters.
I would certainly avoid some plastics like PVC as well as vinyl because it releases hydrogen chloride gas while being cut. This gas is poisonous and really corrosive (your equipment will certainly rust quickly).
We have actually tested the device with engraving as well as cutting different materials. You will certainly locate the outcomes of our examinations few phases lower.
The Makeblock XTool D1 has steel rollers on all axis rather than the plastic ones we have seen on all other equipments. This need to allow for more precision and also much less mechanical wobble when etching at broadband. Xtool 1
Advanced Stepper Electric Motor Drivers
The device has a really advanced controller board. It has Trinamic stepper motor motorists which drive the motors with a pure sine wave. By doing this the electric motors are extremely exact and silent. The motorists also support homing procedure without making use of limit changes as the vehicle drivers determine existing with motors and also spot the limit this way. This is why this maker does not need physical limit switches for homing.
The device has drivers for 3 axis– so you can plug in the roller system as a Z axis rather than having to detach one of the axis when collaborating with a roller system.
XTool D1 Software
XTool D1 can be regulated by means of Wi-Fi or USB. The laser engraver device instantly stops if an unintentional touch takes place. This is wonderful for people who are concerned concerning safety and security. The device is additionally compatible with Windows and also Mac OS systems.
The XTool D1 software is really easy to use. Once you have the artwork prepared, you can make use of the app to establish the laser. You can likewise tailor the laser settings and also create personalized artwork. The application also includes a products list.
XTool D1 Pro is an upgrade to the previous XTool D1 laser cutter. It is a high-accuracy laser reducing device that can engrave over 100 products. The laser engraver device is easy to use and features a protective cover. The equipment has a guarantee of year.
XTool D1 Engraving
The XTool D1 is an extremely flexible inscribing device. It cam be made use of to inscribe on all types of materials/.
Here is a checklist of products and also attributes that the XTool D1 flaunts:
- Vector Image Engraving
- Aluminium Engraving
- Acrylic Engraving And Cutting
- Plywood Cutting
- Hardwood Cutting
- Stainless Steel Engraving
- Photo Engraving
FAQ
Is the XTool D1 worth it?
Makeblock XTool D1 is an effectively thought out equipment. Accurate, rapid and also solidly built. It comes with a premium cost, yet it deserves it for somebody that desires a great and also practically an industrial grade table top laser engraver with the ability of rapid cutting and exact engraving thanks to an effective 10W laser component.
Is XTool better than Glowforge?
The initial laser inscription as well as cutting maker on our checklist is XTool D1 pro, the very best alternative to Glowforge. It remains in starting point because it has gotten the Red Dot Design 2022 Honor. The exceptional layout and also cutting edge modern technology set this equipment apart from other devices on the market.
Can the XTool D1 cut wood?
XTool D1-5W can reduce a 4mm basswood board at the same time, and XTool D1-10W can reduce a 6mm basswood board
How thick wood can XTool D1 cut?
XTool D1-5W can cut 6mm wood board at once, and also XTool D1-10W can cut 10mm wood board at one time.
Can XTool D1 cut leather?
XTool can cut and inscribe a substantial range of products, from something as slim as tissue paper to something as thick as leather as well as timber panels.
XTool D1 is a diode laser engraving and reducing maker that is compatible with a variety of materials, consisting of various sorts of wood. Its powerful and very concentrated laser can quickly reduce as well as inscribed timber with best accuracy as well as precision.
Can the XTool D1 engrave alliminum?
You can also obtain the infrared laser component, which is specifically produced metal and plastic engraving. It can engrave various steels, consisting of light weight aluminum and precious metals. It can likewise do colored engraving on numerous metals, consisting of aluminum.