What is the Makeblock XTool D1? Programming With A Xtool X100 Pro
XTool D1 is a laser cutter that has actually been created by Makeblock. Programming With A Xtool X100 Pro
The company was established in 2012 by Jasen Wang, that studied airplane design at Northwestern Polytechnic College. The firm is committed to creating ingenious products to aid people share themselves with development. Because its development, Makeblock has released numerous instructional robotics, along with a coding platform for kids. It additionally introduced the MakeX Robotic Competitors.
The XTool D1 is a mobile laser engraver that can reducing and also inscribing a selection of products. Its laser can cut out intricate forms much faster than a scroll saw or jigsaw, and can be utilized for several tasks. In addition to engraving, the D1 can also be utilized for other jobs, consisting of developing fashion jewelry and also lamp tones.
The D1 is a do it yourself set that can be set up in just regarding half a hr. Its enclosure is foldable, allowing for easy mobility as well as reliable ventilation. It is additionally constructed from flame-retardant polyester, making it safe from dirt bits. The room also safeguards the functioning surface under the maker.
The XTool D1 is equipped with a laser module that can engrave on metals and several various other materials. It has an ultra-fine pressed laser spot of 0.08 x 0.08 mm. This allows for finer engraving and also greater precision.
The D1 likewise has a high resolution of 1000 DPI, that makes it feasible to inscribe on a large range of materials. The D1 also has an integrated mobile phone application that can be downloaded from the Android Shop or the Apple Application Shop. The application can be made use of to import laser layouts from free vector sites, consisting of Etsy. The D1 can also be connected to a computer system through USB or WiFi. It can likewise move information via Wi-Fi or a large ability TF card.
The D1 can etching on Poplar plywood, which is among the most commonly made use of timbers for laser cutters. The D1 can also reduce on other timbers, including tough maple, walnut, as well as rosewood. Its laser head is flexible, permitting a 50mm variety. It can additionally refine products up to 10mm thick, which indicates that it has the ability to inscribe on a variety of materials. The D1 is created for both house as well as organization use.
The XTool D1 comes in two versions: the 20W variation and the 5W design. The 20W variation has a bigger laser head, and also a smaller working location. The 5W model has a working area of 430 x 400 mm. It has a greater maximum speed of 400 mm/s, which makes it a faster machine. Programming With A Xtool X100 Pro
The D1 includes a steel structure, which supplies optimum security and resilience. It likewise has a concurrent belt to improve motion precision. The belt’s moderate tension is required for precision, particularly when relocating at high speeds. The concurrent belt can also aid the machine stay stable and also minimize vibration. It can additionally remove the activity space, enabling great vector graphics at high speeds.
Order Your XTool Laser Products Here – Best Prices Guaranteed
XTool D1 Specification
| Parameter | Value |
|---|---|
|
Engraving Size
|
432 * 406 mm (17 * 16 inch)
|
|
Engraving Materials
|
Wood, Bamboo, Cardboard, Plastic, Leather, PCB Board, Aluminum Oxide, Non-reflective, Electroplating Layer and Paint Surface Layer Metal, 304 Mirror Stainless Steel, Glass, Ceramics, Cotton Cloth, Slate;
|
|
Laser Output Optical Power
|
10W
|
|
Laser Wavelength
|
450nm
|
|
Focusing Method
|
Fixed focus laser
|
|
Operating Software
|
Makeblock LaserBox Basic, LightBurn, Android and iOS
|
|
Input voltage
|
AC100-240V, 50/60Hz
|
|
Weight
|
5kg
|
|
Warranty
|
One Year
|
XTool D1 Laser Diode
XTool D1 Laser Diode is the most powerful diode laser on the market. It produces clear lines down to 0.06 mm. This makes it an outstanding choice for mostly all engraving jobs. Its style is risk-free and also trustworthy. It is ideal for local business as well as hobbyists.
It can inscribe different types of metal as well as wood. It has the capability to cut eight to tenmm plywood in one pass. It also has the ability to cut leather as well as polymer.
It features a variety of devices. You can acquire the package pack that consists of the Air Assist Establish as well as Honeycomb Working Panel. It costs $119 and also $269, respectively. You can additionally get a 1064nm laser head. This head lowers burn marks in plastic and also is particularly helpful for fragile fashion jewelry designs. It additionally has a motion sensor and flame detection sensor.
It also includes an emergency quit switch. It can be controlled via Wi-fi and can import laser layouts from totally free vector websites like Etsy. You can also manage it through the Makeblock XTool D1 app on Android and iphone.
It has a great emphasis mechanism. The laser crosshairs move as needed and move to the framework of the artwork. This makes the inscribing extremely exact. It can also be used to develop a thickening result, which can be useful when inscribing big items.
The XTool D1 Pro has improved attributes and also laser power. It uses a 20W laser module to create a beam that reduces items in one pass. It can puncture 8mm black acrylic and 10mm basswood. It also has a greater speed. It can get to etching accuracy of 0.0004 inches.
XTool D1 Focusing Procedure
The focusing technique on this equipment is really creative. Next to the laser component, there is a rotating arm which you pull out when you want to concentrate the laser. It ensures that you go down the directly the right range from the material. After that you tighten the thumb screw as well as pivot the arm back up. Programming With A Xtool X100 Pro
XTool D1 Special Features
Here are a few of the leading Unique Features of the XTool D1:
Wireless Connectivity
Device can be attached by means of USB or a Wi-fi. And also you can also control with a smart device app on Android or iphone.
Cutting and also Inscription Different Materials
Engrave: Wood, Bamboo, Cardboard, Plastic, Natural Leather, PCB Board, Light Weight Aluminum Oxide, Non-reflective, Electroplating Layer and Paint Surface Layer Steel, 304 Mirror Stainless-steel, Glass, Ceramics, Cotton Towel, Slate.
The Makeblock XTool D1 is additionally a very qualified laser cutter.
Cut: Cardboard, Non-woven Material, Timber Board, Acrylic, Some Thin Plastic Board, Sponge; cardboard …
You can reduce greater than 10mm thick things with this laser engraver. The equipment can reduce wood, especially Poplar plywood which is soft and also it is the preferred wood for all laser cutters.
I would avoid some plastics like PVC and also vinyl because it launches hydrogen chloride gas while being cut. This gas is toxic and also very destructive (your equipment will certainly corrosion quickly).
We have actually examined the maker with engraving and also cutting different products. You will locate the outcomes of our tests few chapters lower.
The Makeblock XTool D1 has steel rollers on all axis as opposed to the plastic ones we have actually seen on all various other equipments. This ought to permit even more precision and less mechanical wobble when etching at broadband. Programming With A Xtool X100 Pro
Advanced Stepper Electric Motor Drivers
The machine has an extremely innovative controller board. It has Trinamic stepper motor chauffeurs which drive the electric motors with a pure sine wave. In this manner the electric motors are very exact and also silent. The drivers also sustain homing treatment without utilizing restriction switches as the drivers gauge present with motors and also identify the limit by doing this. This is why this maker does not need physical limit switches over for homing.
The maker has chauffeurs for 3 axis– so you can connect in the roller system as a Z axis instead of needing to disconnect one of the axis when working with a roller system.
XTool D1 Software
XTool D1 can be managed via Wi-Fi or USB. The laser engraver tool instantly stops if an unexpected touch occurs. This is great for people that are concerned regarding safety. The device is likewise suitable with Windows as well as Mac OS systems.
The XTool D1 software is really easy to use. Once you have the art work prepared, you can make use of the app to set up the laser. You can additionally personalize the laser setups and also create personalized art work. The app also consists of a products list.
XTool D1 Pro is an upgrade to the previous XTool D1 laser cutter. It is a high-accuracy laser reducing equipment that can etch over 100 materials. The laser engraver device is easy to use and features a safety cover. The equipment has a warranty of one year.
XTool D1 Engraving
The XTool D1 is a really flexible inscribing equipment. It cam be made use of to engrave on all kinds of materials/.
Below is a list of materials as well as functions that the XTool D1 flaunts:
- Vector Image Engraving
- Aluminium Engraving
- Acrylic Engraving And Cutting
- Plywood Cutting
- Hardwood Cutting
- Stainless Steel Engraving
- Photo Engraving
FAQ
Is the XTool D1 worth it?
Makeblock XTool D1 is an extremely well thought out machine. Exact, rapid as well as well built. It comes with a costs price, but it is worth it for somebody that desires an excellent as well as nearly a commercial quality table top laser engraver capable of fast cutting and accurate inscription thanks to a powerful 10W laser component.
Is XTool better than Glowforge?
The initial laser inscription and reducing device on our listing is XTool D1 pro, the very best option to Glowforge. It is in first place because it has gotten the Red Dot Style 2022 Honor. The impressive design and modern modern technology established this maker aside from various other makers on the marketplace.
Can the XTool D1 cut wood?
XTool D1-5W can reduce a 4mm basswood board at once, and also XTool D1-10W can reduce a 6mm basswood board
How thick wood can XTool D1 cut?
XTool D1-5W can reduce 6mm timber board at once, as well as XTool D1-10W can reduce 10mm timber board at one time.
Can XTool D1 cut leather?
XTool can cut and engrave a big variety of products, from something as slim as cells paper to something as thick as leather and also timber panels.
XTool D1 is a diode laser engraving as well as reducing equipment that is compatible with a wide range of products, consisting of different types of timber. Its effective and also very concentrated laser can easily reduce as well as etched wood with utmost precision and precision.
Can the XTool D1 engrave alliminum?
You can additionally obtain the infrared laser module, which is specifically produced metal and also plastic inscription. It can engrave different steels, consisting of aluminum and also precious metals. It can likewise do tinted etching on various metals, consisting of light weight aluminum.
Programming With A Xtool X100 Pro Programming With A Xtool X100 Pro